Memories - Bendi Card

Hello my friends!   

It's time for a new release at Heartfelt Creations!   Out new release is the Camelia Carnation Collection!  This is a fun and versatile stamp and die set that you can use through out the year!   I chose to create a Bendi-Card to showcase the Camelia Carnation Collection!    

HCDP1-285, Camelia Carnation Paper Collection

HCPC-3806, Small Camelia Carnation Cling Stamp Set

HCD1-7164, Small Camelia Carnation Dies

HCPC-3807, Large Camelia Carnation Stamp Set

HCD1-7165, Large Camelia Carnation Dies

HCD1-757, Eyelet Oval and Basics Large Dies

PGM15015, Rajni Chawla's Frosting Powder

159723, Designer Dries Clear Adhesive

HCPP3-452, 12 x 12 Cardstock - White

HCST1-401, Deluxe Flower Shaping Kit

HCDA1-450, Stack & Store Daubers- Pack of 6

532423-Kit, Sizzix Vagabond 2 with Solo Wafer-Thin Die Adapter

173742, Scor-Pal Measuring & Scoring Board

71006, ColorBox Fluid Chalk Inkpad - Rose Coral

71015, ColorBox Fluid Chalk Inkpad - Rouge

71034, ColorBox Fluid Chalk Inkpad - Blue Iris

TSMP708, Memento Dye Inkpad - Olive Grove

Blue cardstock, Ranger clear Crackle Paste, heat tool, healing mat, craft knife, glue gun, mounting tape, Squeezed Lemonade Distress Ink, 

Create a Bendi- Card by following these easy and wonderful instructions  by Cheryl on YouTube > https://www.youtube.com/watch?v=HMiPKozFUCI     

The card was altered by creating a blue cardstock layer 1/4 inch smaller in width and height  than the base card and designer paper layers 1/4 inch smaller in length and height than the base layer.  The designer paper was from the Camelia.  The picture of the bridge was selected from the paper collection and cut with the oval die from the Eyelet Oval and Basics Large Dies.  The eyelet oval mat was cut from blue cardstock.   The oval scene was adhered on the bottom half with Designer Dries clear adhesive and adhered to the card.   

The flowers were cut from the Camelia Carnation stamp and cut with the coordinating die.   They were assembled using the Basic Flower Mold.  Final shaping was done with the Deluxe Flower Shaping Kit.   It wasn't needed but I am addicted to it so I use it for everything!    The flowers were colored with the following ink pads - Rose Coral, Rouge and Blue Iris ColorBox Fluid Chalk Inkpads and Squeezed Lemonade Distress Ink.   The leaves were sponged with Memento Olive Grove.    

The flowers were adhered to the card  with a hot glue gun.  The sentiment was cut from the Camelia Carnation Paper Collection.  

Thank you for stopping by and check out the new release at Heartfelt Creations!    

Heartfelt Creations - Sending Birthday to a Special Someone

Welcome to our new Heartfelt Creations Release -  Heartfelt Love Collection.   We have a wonderful "Love" theme for you this month.   You will have plenty of time for all those Valentine cards!    

Heartfelt Love Paper Collection
Eyelet Hearts Die
Classic Leaf Cling StampSet
Classic Leaf Die
Open Leaf Cling Stamp Set
Art Foam Paper
Designer Dries clear Adhesive
Glue Tips - Metal
Pin6, glue Pins
Memento Dye Ink Pad - Rose Bud
Memento Dye Inkpad –Olive Grove
Rajni Chawla’s Crystal Clear Glitter
8.5 x 11 Cardstock - White
Stack and Store Daubers- Pack of 6
Sizzix Vagabond 2 With Solo Wafer-Think Die Adapter

Pink, white and red cardstock, Ranger Vintage Photo Distress Ink, glue gun,  mounting tape, double sided tape, mini mister, Copic Markers - YG61, YG63, YG67. 

Create a heavy white card base measuring 5 1/2 x 5 1/2 inches.   Cut and pink cardstock at 5 1/4 x 5 1/4 inches.   Cut the Designer paper at 5 x 5 inches and sponge the edges using Vintage Photo Distress Ink.   Adhere the layers using double sided tape.   

Die cut nesting hearts from the Eyelet Hearts Die using red and pink cardstock and from the Heartfelt Love designer paper with the sentiment as shown on the card.   Adhere the hearts with Dries Clear Adhesive.  Attach the heart to the card using mounting tape.   

Stamp petals from the Classic Rose stamp set using Memento Rose Bud Ink.   Gently list the petals and shape with the Deluxe Flower Shaping Kit.   Adhere the petals using Dries Clear Adhesive.   Apply Dries Clear Adhesive to some of the petals and sprinkle with Crystal Clear Glitter. 

Using Olive Grove Ink, stamp some of the leaves on Art Foam and some on paper using Classic Leaf and Open Leaf stamp set.  Die cut with the Classic Leaf Die Set.  Sponge with Olive Grove Ink.   Add some YG61, YG63 and YG67 Copic Markers.    

Adhere to leaves and flowers with a glue gun to complete the card. 

Video link for creating Dimensional Roses > https://www.youtube.com/watch?v=Z8P070kC3oo&feature=youtu.be

Thank you for stopping by and Happy Crafting! 

Twas the Night Before Christmas

\

I am so glad you stopped by!    

Today I am sharing a Christmas card I created using Heartfelt Creations; Winter's Eve Collection.   I love having an opportunity to create a few Christmas cards early and this collection is perfect.   I can just feel the warmth of the fireplace and the now biting my nose when I step outside!  Talk about fun memories! 

Heartfelt Creations Products
Winter's Eve Paper Collection, HCDP1-281
Winter's Eve Cling Stamp Set, HCPC-3796
Window Frame Cling Stamp Set HCPC-3794
Window Fame Die Set, HCD1-7148
Window Box Elements Die, HCD1-7150
Window Box Fillers Cling Stamp Set, HCPC-3795
Window Box Fillers Die, HCD1-7149
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die Set, HCD1-766

Designer Dries Clear Adhesive, 159723

Metal Adhesive Tip, 352854

Glue Pins, Pin6

Bright Ideas Prills, ANC 850

Darice Double Sided Adhesive Foam Strips, D120601

Deluxe Flower Shaping Kit, HCST1-401

Scor-Pal Measuring Scoring Board, 173842

Stack Store Daubers, HCDA1-449

Memento Desert Sand Dye Ink, TSMP804

Guacamole Fluid Chalk Ink Pad, 71058
Berrylicious Fluid Chalk Ink Pad, 71053

Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Thin die Adapter, 532423-Kit
Clear Cardstock, GBKK811B1
White Cardstock, HCPP2-451

Other Products
Red cardstock, paper trimmer, glue gun, heat tool, Clear Crackle Paint, Copic Alcohol Ink Markers (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21, B24, Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00).

Card base is  a top fold card measuring 5 1/2 x 5 1/2 inches.  The base layer was cut at 5 1/4 x 5 1/4 inches and the designer paper was selected from the Winter's Eve Paper Collection.

The poinsettia's were stamped and cut  using the Sparkling Poinsettia Stamp and die set. They were sponged with Guacamole and a touch of Berrylicious fluid Chalk Ink.  They  were shaped with the Deluxe Flower Shaping Kit. The flowers were assembled and allowed to dry.  Clear Crackle Paint was applied to the petals and sprinkled with frosting powder and heat set.  Yellow Prills were applied to the center for stamen.

The holly berries and and focal image  were stamped with Memento Desert Sand Ink. The berries/leaves and focal image were colored with Copic alcohol ink.  I created my own wallpaper you can see through the window pane.   The color combo was - (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21,  Christmas Balls - B00, B21, B24, B27,  Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00).

The window and window shutters were cut from theWindow Fame set.   Die cut the window frame  3 times and adhere  for extra strength.  Clear cardstock was was cut and adhered on the underside of the window frame.

Adhere the flowers and  holly bush with a glue gun.   Darice foam strips were adhered between the focal image and the window frame.  The frame was then adhered to the card with Designer Dries Clear Adhesive.    

Thank you for stopping by and I hope you check out Heartfelt Creations; Winter's Eve Collection and check out all the great projects from my Teamies!   You can see links to thier blog on my sidebar!

 

Heartfelt Creations - Wishing You a Magical Season

Hello everyone!   Welcome to Inspiration Wednesday at Heartfelt Creations!   today I have a card using the Holly Berry Jingle Stamp Set.   I hope you enjoy it!  

Festive Holly Paper Collection, HCDP1-280

Holly Berry Jingle Stamp Set, HCPC-3793

Holly Berry Die Set, HCD1-4147

Festive Holiday Die Set, HCD17146

Sparkling Poinsettia Cling Stamp Set, HCPC-3680

Sparkling Poinsettia Die, HCD1-766

Memento Desert Sand Dye Ink Pad, TSMP804

Memento Olive Grove  Dye Ink Pad, TSMP708

ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053

ColorBox Fluid Chalk ink Pad - Guacamole, 71058

Deluxe Flower  Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159723

Metal Tip for Adhesive, 352854

Scor-Pal Measuring & Scoring Board, 173842

Stack & Store Daubers, HCDA1-449

White Cardstock, HCPP2-451

Rajni Chawla's Frosting Powder, PGM15015

Bright Ideas Prills, ANC852

Pumpkin cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers (Pomegranate R00, R11, R20, R22, R24, R56, YG11, YG61 - Leaves YG99, YG95, YG93, YG91, Berries R20, R22, R24, R27, R58, opaque white ink - Cinnamon Stick E00, E11, E13, E15, E19, E08), Clear Crackle Paint, heat tool, paper trimmer, double sided tape, mounting adhesive, glue gun, Gemstone  Embossing Folder, flower stamens, Vintage Photo Distress Ink. 

Create a 5 1/2 x 5 1/2 inch top folding card using heavy white cardstock.  Cut and adhere pumpkin base layer cut at 5 1/4 x 5 1/4 inches using double sided tape for extra strength.   Select the yellow designer paper from the Festive Holly Paper Collection.  Cut at 5 x 5 inches.  Apply Vintage Photo Distress Ink to the Gemstone Embossing Folder and emboss the designer paper.   Sponge edges with the Vintage Photo Distress Ink.  Apply Clear Crackle Paste to the edges and sides of the designer paper and sprinkle with Frosting Powder.  Heat set until it turns white.  Adhere designer layer to the card.   Die cut the Festive Holiday decorative die  from pumpkin cardstock and adhere it to the upper part of the card as shown.  

Stamp the pomegranate using the HollyBerry Jingle Stamp Set.   I used Olive Grove ink on X-Press It Cardstock.  The image was colored with the following marker combos - Pomegranate -  R00, R11, R20, R22, R24, R56, YG11, YG61 - Leaves -YG99, YG95, YG93, YG91, Berries - R20, R22, R24, R27, R58, opaque white ink - Cinnamon Stick - E00, E11, E13, E15, E19, E08.  Die cut with the coordinating die. Apply Clear crackle Paint and sprinkle with the frosting powder.  Heat set.  Die cut 4 pomegranate images from dark green cardstock from your stash.  Adhere them together with your focal image.   This will allow extra strength to the image.  

Stamp the poinsettia flowers  from the Sparkling Poinsettia stamp set on white and green cardstock with Desert Sand Ink.  I selected this ink so I could have an invisible line and could use it for the two different colored flowers.   I used the largest petal  for my green leaves.  Cut the petals using the Sparkling Poinsettia Die Set.  Sponge with Berrylicious and Guacamole Chalk Ink.  Lightly spritz the petals with a water mini mister and  shape the petals with the Deluxe Flower Shaping Kit.  Adhere the layers and apply the Crackle Paint, sprinkle with frosting powder and heat set. 

Apply the focal image with dimensional dots and adhere the poinsettia's with a glue gun to finish your  festive Holiday card. 

  

Thank you so much for stopping by!    I hope you have a wonderful day!   I will be positing a watercolor and quilled crd for you in a couple days so come back soon!

Heartfelt Creations - Just a Country Christmas

Hello everyone!   I don't know about you but we are experiencing triple digit temperatures in the Valley Springs area of California!   Whew!  I could use some of the chilly, snowy weather that bites your nose when you walk outside the door!  LOL   

Today I created a card with the Festive Holly Stamp and Die set from Heartfelt Creations!  💕💕  

I hope you enjoy it.   I have all products and details listed.  Don't hesitate to ask if you have any questions!    

Festive Holly Paper Collection, HCDP1-280

Festive Holly Stamp and Die Set, HCPC-3792

Festive Holly Die Set, HCD1-7146

Deluxe Flower Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159723

Metal Tip for Adhesive, 352854

Sizzix Vagabond 2,  532423

Scor-Pal Measuring and Scoring Board, 173842

Double dots 3 D Foam Circles, DDots

Stack & Sore Dauber, HCDA1-449

White Cardstock, HCPP2-451

Rajni Chawla's Frosting Powder, PGM15016

White Embossing Powder, RPEJ685

Memento Tuxedo Black Ink, TSMP900

Olive Green Cardstock, trimmer, Misty, Copic Alcohol Ink Markers (Birds R20, R22, R24, R27, C1, C3, C5, C7 - Berries R20, R22, R24, R59 - Leaves YR13, YG61, YG63, YG67, GY95 - Wheel E30, E33, E35, E37, E47), Versamark Ink, Heat Tool, White Gel Pen, Ranger Vintage Photo Distress Ink,  rhinestone, Clear Crackle Paint, X-Press It Blending Cardstock. 

Cut a top fold card at 5 1/2 x 5 1/2 inches from heavy white cardstock. Cut the base layer from olive green cardstock at 5 1/4 x 5 1/4 inches.  Cut the designer paper from Festive Holly Collection at 5 x 5 inches.   Add some additional snow with the gel pen on the designer paper and sponge edges with Vintage Photo Distress Ink using Stack & Store Daubers.   Add some twine and adhere the layers with double sided tape.   

Stamp the image with the cardinals and the wheel from the Festive Holly Stamp Set onto Copic compatible paper.  I used X-Press It.  The image was colored with the following Copic color combo - (Birds R20, R22, R24, R27, C1, C3, C5, C7 - Berries R20, R22, R24, R59 - Leaves YR13, YG61, YG63, YG67, GY95 - Wheel E30, E33, E35, E37, E47).   Die cut the image with the coordinating die.  Cut 4 additional die cut images from dark brown or black cardstock.   Adhere the layers of the brown die cut on top of another and adhere to the colored image using Dries Clear Adhesive.  This will add strength and some dimension to the focal image.  Pop up the focal image on the left side of the card using dimensional foam dots. 

Stamp the sentiment with Versamark Ink and emboss with white powder. Heat set.  Die cut with a tag tie and add snow using various size dots with a white gel pen.   Pop the tag up using dimensional dots and apply a rhinestone to the bow.  

Apply a generous coat of Clear Crackle Paint the the bottom of the card and to the top of the wheel as shown.   Sprinkle with a generous amount of Frosting Powder and heat set.   This will complete a winter, snowy look to your holiday card. 

Mail?!!!    Is that box for me from Heartfelt Creations? 💕

Thank you for stopping by and don't hesitate to ask any questions you may have!    

Heartfelt Creations - Best Wishes to the Bride and Groom

It's inspiration Wednesday for Heartfelt Creations.   We are showcasing the gorgeous Classic Wedding Collection!   

Heartfelt Creations Products

Classic Wedding Paper Collection, HCDP1-279

Classic Wedding Bells, HCPC-3789

Classic Wedding Bells Die Set, HCD1-7143

Decorative Medallion Die, HCD17144

Classic Rose Stamp, HCPC-3752

Classic Rose Die Set, HCD1-7110

Memento Desert Sand Dye Ink, TSMP804

Memento Olive Grove Dye Ink Pad, TSMP708

Gold Gala Glitz, 4gld

Rajni Chawla's Crystal Clear, PGM15015

Rajni Chawla's Frosting Powder, PGM15016

Scor-Pal Measuring and Scoring Board, 173842

Deluxe Flower and Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159723

Vagabond-2, 532423

Cardstock - White, HCPP2-451

Embossing Powder - White, RPE1685

Stack and Store Daubers, HCDA1-449

Dimensional Foam Circles, DDots

Apricot-pink cardstock. 65 lb. white cardstock, olive green cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers, Abandoned Coral Distress Ink, Misty, Copic Alcohol Ink Markers (E000, E11, E21, C0, C1, C3, C5,  C7, B0000, B000, B00, B21, B92, G40, G45, RV81, RV85), double sided tape, heat tool, glue gun, Crackle Paint, mini mister. 

Cut card  base from heavy white cardstock to create a 5 1/2 x 5 1/2 inch top folding card.  Cut the base layer from apricot-pink cardstock at 5 1/4 x 5 1/4 inches.   Cut  the designer paper from the Classic Wedding Paper Collection at 5 x 5 inches.  sponge the edges of the paper with  Abandoned Coral Distress Ink.  Adhere the layers with double sided tape. 

Stamp the bride and groom image from the Classic Wedding Bells Stamp set using Desert Sand Dye and X-Press It Blending Cardstock. You can use any Copic compatible paper.  Color the image with the following Copic Marker color combo ( Skin- E000, E11, E21, Hair and Suit - C0, C1, C3, C5, C7, Wedding Gown and veil - B0000, B000, B00, B21, B92, Bouquet - G40, G45, RV81, RV85).   Die cut with the coordinating die.   Cut  three or four additional images with the die from dark green cardstock.  Adhere the layers using Designer Dries Clear Adhesive.  This will provide dimension and strength to the focal image.   Apply a thin coat of Dries Clear Adhesive  to the image and lightly sprinkle with Crystal Clear Glitter.   

Die cut the Medallion from light blue cardstock and the coordinating mat from the green cardstock.   Lightly dot the medallion with Dries Clear Adhesive and apply to the dark green medallion mat.     Adhere the medallion  to the card base as shown.   

Stamp Classic Roses image on light weight white cardstock using white embossing powder. Heat set the flowers.   Stamp the leafs with he Classic Rose Stamp set using Olive Green ink.   Die cut with the coordinating die sets.   Sponge the flowers with Abandoned Coral Distress Ink.  Sponge the leaves with Olive Green and Abandoned Coral ink.   Die cut the roses and leaves.   Shape the flowers and leaves with the Deluxe Flower Shaping Kit.  Allow to dry and  adhere the layers.   You can view a wonderful tutorial on flower shaping dimensional roses HERE.  Lightly brush the flower petals with Crackle Paint and sprinkle with Frosting Powder.   Heat set.   

Apply Dries Clear Adhesive to the card base as shown and sprinkle Gold Gala Glitz and allow to dry.  Apply dimensional foam dots to the focal image and adhere over the Gold Gala Glitz.   Arrange and adhere the leaves and flowers with a glue gun.    

Thank you for stopping by!   I hope you are having a wonderful week!  

Heartfelt Creations - Happy Anniversary

 This wonderful stamp and die set are from Heartfelt Creations new Classic Wedding Collection.    I Love the Classic Wedding Rose stamp!    I recently used this stamp for a wedding card and a birthday card.   It's easy to use and adds a touch of elegance to any card!  

Classic Wedding Paper Collection, HCDP1-279

Classic Wedding Roses, HCPC-3788

Classic Wedding Roses Die Set, HCD1-7142

Classic Wedding Wishes, HCPC-3790

Classic Rose Stamp, HCPC-3752

Classic Rose Die Set, HCD1-7110

Memento Desert Sand Dye Ink, TSMP804

Memento Olive Grove Dye Ink Pad, TSMP708

Fluid Chalk Ink pad - Berrylicious, 71053

Gold Gala Glitz, 4gld

Rajni Chawla's Crystal Clear, PGM15015

Rajni Chawla's Frosting Powder, PGM15016

Scor-Pal Measuring and Scoring board, 173842

Deluxe Flower and Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159723

Vagabond-2, 532423

Cardstock - White, HCPP2-451

Embossing Powder - White, RPE1685

Stack and Store Daubers, HCDA1-449

Tangelo cardstock, green cardstock,  hot glue gun, double sided tape, foam mounting tape, mini mister, Misti Stamping Tool, Copic Alcohol Ink Markers (Flowers - YR0000, YR000, RY21, Leaves- YG99, YG95, HG91, YG67, YG65, YG61, C0, C1), white gel pen, White Prismacolor pencil PC938, X-Press It Blending Cardstock, Coral Distress Ink, Ranger Crackle paste. 

Create a 5 1/2 x 5 1/2 inch card base with heavy white cardstock.  Cut base layer at 5 1/4 x 5 1/4 inches from Tangelo cardstock.  Select the apricot colored paper from the Classic Wedding Paper Collection and cut at 5 x 5 inches.  The paper was covered with a light coat of Designer Dries Clear Adhesive.  I used my finger to rub it on the paper.  I sprinkled Frosting Powder and heat set.  Apply some Dries Clear glue to the grey/white leaves and lightly sprinkle with Crystal Clear Glitter.    The edges were sponged with Coral Distress Ink  and distressed.  Adhere the layers with double sided tape.  

 Stamp the Classic Wedding Roses onto X-Press It using Desert Sand in order to give the flowers a "no line" appearance.   Color the image with Copic Alcohol Ink Markers with the following combo - (Flowers - YR0000, YR000, RY21, Leaves- YG99, YG95, HG91, YG67, YG65, YG61, C0, C1).  Apply white colored pencil on the edges of the flower image to lighten the highlights.  Die cut with the Classic Wedding Roses Die.   Cut 3-4 additional images from Tangelo cardstock. Emboss the sentiment from Classic Wedding Wishes on the center of one shadow layer using white embossing powder and heat set.  Layer the shadow layers with foam mounting tape in-between each and place the colored image on top.   

Stamp Classic Rose Stamp petals using white embossing powder and heat set.   Lightly sponge the  petals with Coral Distress Ink.  Shape the flowers using the Deluxe Flower Shaping Kit.  Apply a light coat of Ranger Crackle Paste and sprinkle Frosting Powder and heat set.  

Stamp the leaves from the Classic Rose Stamp set on green cardstock with Memento Olive Green Ink.  Sponge with Olive Green ink on the edges  and apply  a small amount of Berrylicious Chalk Ink on a few leaves.  Die cut with the corresponding die.   Shape with the Deluxe Flower Shaping Kit and allow to dry.   

Adhere some Gold Gala Glitz to the area that will be near the dimensional flowers using Dries Clear Adhesive - (See reference photo).   Adhere the leaves, flowers and Classic Wedding Rose heart using a glue gun.   Emma Lou has a wonderful video for creating Classic Roses HERE. 

Thank you so much for stopping by.    If you are inspired to try this - I would love to see your special creations!