Wednesday, August 30, 2017

Heartfelt Creations - A Tropical Nesting Circles Card




Hello and welcome!  

Heartfelt Creations is featuring new nesting card bases and new circle and oval die.   
Check this out!   



Tropical Paradise Paper Collection, HCDP1-277
White 6 x 6 Layered Circles Card HCLC1-454-2
Circle Basic Large Die, HCD1-7155
Eyelet Circle and Basic Small Circle Die, HCD1-7154
Tropical Paradise Stamp Set, HCPC-3783
Tropical Paradise Die, HCD17137
Tropical Plumeria, HCPC-3782
Tropical Plumeria Die, HCD1-7135
Tropical Cockatoo Stamp Set, HCPC-3781
Tropical Cockatoo Die Set, HCD1-7136
Designer Dries Clear Adhesive, 159723
Metal Adhesive Tip, 352854
Glue Pins, Pin6
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring & Scoring Board, 173842
Stack & Store Daubers, HCDA1- 449
Memento Tuxedo Black  Dye Ink, TSMP900
Memento Cottage Ivy Dye Ink, TSMP701
Memento Peanut Brittle Dye Ink, TSMP802
Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit










Copic Markers (Cockatoo - C1, C2, C3, Y11, RY21, YR23, YR27,  and black colored pencil, Flamingo - RV10, RV23, YR00, YR18, YR21, YR23, C1, C3, C5, C7, Leaves - G40, G46, YG17, YG11, YG61, YG63, YG67), Clear Crackle Paste, heat tool, glue gun, rhinestones, crystal Stickles, Abandoned Coral Distress Ink, apricot cardstock.







The 6 x 6 circle card comes with the circles already cut in the card base panels.  Sort the panels with the largest circle on top and nesting to the smallest circle.  Select the papers  from the  Tropical Paradise Collection that you want to use on each panel.  You may want to coordinate the panels that face each other when each page is opened.  The Circles Card is 6 x 6 inches so  I cut my Tropical Paradise paper at 5 3/4 x 5 3/4 inches.   This will provide a 1/8 inch border around the edges.   Sponge the edges of the papers with Peanut Brittle Ink.   The paper was applied to the panels that would be on the right hand side.  The Basic Circle Large Die was secured  in the precut circle with repositional tape.  This process was repeated for each panel on the right with the appropriate nesting die.   The last page was a solid 5 3/4 x 5 3/4 inch card without a circle.    The right sided panels were applied to the  top of the bookbinding flap of the card base with double sided tape.  The designer paper was then  adhered to the left side of each panel.  Secure the die in the appropriate circle opening and then  sandwich the page with the  die between two  cutting plates.  The rest of the pages will hang off the foot edge of the cutting plate.   Doing it in this order allows the 1/8 inch margin to be consistent for each page.  I did not have any problem running the die through the panels with my Vagabond 2.  The bulk of the panels will not have any pressure because only the panel with the die will be sandwiched by the cutting plates.  The front panel had the eyelet die cut with apricot  cardstock by nesting the eyelet and the next size smaller together.  The eyelet trim was added to the top of the circle.   Stickles were applied to the eyelet embellishment.   I added a decorative paper to the back of my card but that is totally optional.

The flamingos, cockatoo  and various leaves were stamped with black ink.   They were colored with the following Copic color combos (Cockatoo - C1, C2, C3, Y11, RY21, YR23, YR27,  and black colored pencil, Flamingo - RV10, RV23, YR00, YR18, YR21, YR23, C1, C3, C5, C7, Leaves - G40, G46, YG17, YG11, YG61, YG63, YG67).     Each image was cut with the appropriate die.  Additional images were cut 3 times from green cardstock and adhered with dries clear glue for strength.   The images were applied to the card base with double sided mounting tape.

The plumeria were stamped with Abandoned Coral Distress Ink.  The flowers were sponged with the Abandoned Coral ink.  The leaves were already colored with Copic markers but the edges were also sponged with Cottage Ivy Ink.   The flowers and leaves were shaped with the Deluxe Flower Shaping Kit.  Clear Crackle was applied to the leaves and petals and sprinkled with frosting power.   The leaves and flowers were heat set. The flowers were applied with a glue gun.

The tunnel card was embellished with rhinestones.

Emma Lou has a wonderful tutorial on creating plumeria  Here





Thank you for stopping by!    I hope you check out all our design team member's fabulous creations with this new special release!  


Tuesday, August 22, 2017

Heartfelt Creations - A Warm Winter's Eve


Welcome!   

It's Inspiration Wednesday for heartfelt Creations!   This month is featuring the Winter's Eve Collection.    I love this collection and the warm, festive feel that comes over me when I look in the window!    I couldn't resist adding the Blazing Poppy flowers for a little "POP".   


Heartfelt Creations Products
Winter's Eve Paper Collection, HCDP1-281
Window Frame Cling Stamp Set HCPC-3794
Window Fame Die Set, HCD1-7148
Decorative Medallion Die, HCD1-7144
Blazing Poppy Petals Stamp Set, HCPC-3674
Designer Dries Clear Adhesive, 159723
Metal Adhesive Tip, 352854
Glue Pins, Pin6
Darice Double Sided Adhesive Foam Strips, D120601
Scor-Pal Measuring & Scoring Board, 173842
Stack & Store Daubers, HCDA1-449
Memento Desert Sand Dye Ink, TSMP804
Memento Rhubarb Stalk Dye Ink, TSMP301
Colorbox Fluid Chalk Ink Pad - Berrylicious , 71053
Colorbox Fluid Chalk Ink Pad - Guacamole , 71058
Colorbox Fluid Chalk Ink - Chambray, 71078
Clear Cardstock, GBKK811B1
White Cardstock, HCPP2-451
Deluxe Flower Shaping Kit, HCST1-401
Teal Gala Glitz, 6teal
Prills - Power Outage, ANC845
Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit



Kraft cardstock, X-Press It Blending Cardstock, heat tool glue gun, Copic Alcohol Ink Markers (Candle -  R81, R85, R89, T2, Flame - E47, E35, Y02, Berries - R30, R35, R39, Leaves - YG11, YG45, G28 G46), White gel pen, Clear Crackle Paint, Vintage Photo Distress Ink, double sided tape.






Create a top fold 5 1/2 x 5 1/2 inch white card base. Cut a base layer from kraft cardstock at 5 1/4 x 5 1/4 inches.   Select the designer paper as shown and cut at 5 x 5 inches.   Apply Clear Crackle paint to designer paper on left side of the paper, sprinkle with frosting powder and heat set.  Apply Designer Dries Clear on the left side of designer paper and apply Teal Gala Glitz. Allow to dry.   Adhere the layers to the card base with double sided tape.

Stamp window frame and candle with Memento Desert Sand Ink.   I used X-Press Blending Cardstock for the candle because I colored it with Copic Markers and designer paper from the Winter's Eve Paper Collection for the window frame.   The window frame was sponged with Vintage Photo Distress Ink.   The light yellow green designer paper was selected to back the window frame.  It was sponged with Vintage Photo.    The Candle was colored with the following color combo - ((Candle -  R81, R85, R89, T2, Flame - E47, E35, Y02, Berries - R30, R35, R39, Leaves - YG11, YG45, G28 G46).   The holly leaves were  accented with a white gel pen.   The images were cut with the coordinating die.

The Blazing Poppy Petals Stamp Set  was stamped on white cardstock with Rhubarb Stalk  Memento Ink.   The flowers were die cut with the coordinating die.   The petals were sponged with Berrylicious Fluid Chalk Ink, misted with water and shaped with the Deluxe Flower Shaping Kit,  They were assembled using Designer Dries Clear Adhesive.  Power Outage Prills were applied to the center of each Poppy.    The Classic Leaf stamp set was stamped with Guacamole Fluid Chalk Ink and die cut with coordinating die.   the petals were sponged with Guacamole, Chambray and a small amount  of Berrylicious Fluid Chalk Ink.  The petals were shaped with the Deluxe Flower Shaping Kit and allowed to dry.   Clear Crackle Paint was applied to the leaves and dusted with Frosting Powder.  The leaves were heat set.

Die cut the Decorative Medallion from white cardstock.    Place clear cardstock under the window frame.   Pop the frame up from the yellow-green designer paper with Darice foam strips.  Adhere the window to the card  on top of the medallion as shown.  Adhere the leaves and flowers with a glue gun.

Embellish with with various sized dots from a white gel pen to look like snow. Apply more dots in the upper corners with the  white gel pen.

  Emma Lou's Tutorial on creating flowers with the Blazing Poppy Petal Set can be found HERE. 




Thank you so much for stopping by!   I hope you enjoyed my take on this stamp and die set and that you check out the wonderful inspiration from my other team members!   



Thursday, August 17, 2017

Heartfelt Creations - Festive Holiday Gift










Welcome!  It's time to share another project from Heartfelt Creations!  We are featuring the Winter's Eve Collection this week!  

Heartfelt Creations Products
Winter's Eve Paper Collection, HCDP1-281
Winter's Eve Cling Stamp Set, HCPC-3796
Window Frame Cling Stamp Set HCPC-3794
Window Fame Die Set, HCD1-7148
Window Box Elements Die, HCD17150
Window Box Fillers Cling Stamp Set, HCPC-3795
Window Box Fillers Die, HCD1-7149
Designer Dries Clear Adhesive, 159723
Metal Adhesive Tip, 352854
Glue Pins, Pin6
Nuvo Crystal Drops - Dandelion Yellow, NU673
Darice Double Sided Adhesive Foam Strips, D120601
Scor-Pal Measuring & Scoring Board, 173842
Stack & Store Daubers, HCDA1-449
Memento Desert Sand Dye Ink, TSMP804
Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit
Clear Cardstock, GBKK811B1
White Cardstock, HCPP2-451




SVG cut file - Gift Boxes Kit (svgcuts.com), Woodgrain embossing folder, Mini Brick Stencil, Texture Paste, Bead Gel, twine,  X-Press It, Copic Markers (Floor - E30, E33, E35, E44,  Window - E40, E42, E44, Fireplace - C3, C4, C5, Wreath/floors - G40, G43, G45, R20, R24, Fire - Y11, YR23, YR26, Bricks - E00, E02, E04, E08, E11,  E19, Mantle/Logs - E30, E33 E35, Flowers BV00, Y11, R20, R24, R56), Pumice Stone Distress Ink.  
Instructions
Create gift box per instructions.  video>   Gift Boxes Kit.  The paper was selected from Winter's Eve Paper Collection.  
Stamp window,  flowers and fireplace image  using Memento Desert Sand Ink on X-Press It Blending Cardstock.  Color the images with the following Copic Markers - (Floor - E30, E33, E35, E44,  Window - E40, E42, E44, Fireplace - C3, C4, C5, Wreath/floors - G40, G43, G45, R20, R24, Fire - Y11, YR23, YR26, Bricks - E00, E02, E04, E08, E11,  E19, Mantle/Logs - E30, E33 E35, Flowers BV00, Y11, R20, R24, R56), Cut the window, flowers  and window box with the corresponding die.  Emboss the flower box with a woodgrain embossing folder and sponge with Pumice Stone Distress Ink.  Die cut 3 additional window frames and adhere with Designer Dries Clear Adhesive.  This adds extra strength and dimension.   Apply Clear Cardstock between the window frame and the fireplace scene and pop up the window frame with Darice foam strips.  Adhere the window frame, window box and scene to the gift box.  Adhere the flowers and green leaves with Dries Clear Adhesive.   

Tie some twine or hemp around the lid of the box.   Fill with candy or any gift that you would like to share with that special friend.   








































Thank you so much for stopping by.    


Thursday, August 10, 2017

Heartfelt Creations Celebrates 20th Birthday Blog Hop




It's a PARTY and YOU are invited!  


Welcome to our Heartfelt Creations 20th Birthday Hop!   

Heartfelt Creations is celebrating their 20th Birthday by having some great GIVEAWAYS heading your way!
So Let's HOP!


The order of the hop is.....   drum roll...... 

 Marie Gamber (that's me! )

Check back at the end of the Hop -  August 18th  at  our Heartfelt Creations Blog 
for a list of all the winners!!! 

Trust me - You will want to join the party!
  

You will have until midnight to comment on the featured Designer's  Blog!   

Sneak Peek! 
When the music stops on my Blog 
This will be my Giveaway!     




6 x 6 inch Foldout Card - Black, HCCF1-445-1
Glue Pins, Pin6
Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit



Other Products
Double sided tape, mounting tape, X-Press it Blending Cardstock, purple cardstock, yellow cardstock,  green cardstock, Versamark, Spellbinder Petite Oval Die, heat tool, quilling tool,  Fine  scissors, Detail Black Embossing Powder, Squeezed Lemonade Distress Ink,  yellow stamen, Copic Alcohol Ink Markers (Purple flower - BV000, BV00, BV13, BV17, Frog - YR21, YR18, Y11, YG13, YG17, YG67, W3, Dragonfly - V00, V05, V09, RV00, RV04, RV17, YG11, YG17, YG67, Mushrooms - BV00, BV13, BV17, #40, E41, E44, RV00, RV04, RV17).



Cover the 6 x 6 black foldout card base with paper from the Blushing Rose paper collection.  Leave 1/8 inch around each edge for a border. Adhere to the foldout card base.   Die cut the medallion from purple cardstock and the medallion base from yellow cardstock.  Adhere to the last page.

Stamp the frogs, dragonfly and mushrooms from the Froggy Hangout and Leaping Frog Stamp Set.  I used Ex-Press It Blending Cardstock and Memento Tuxedo Black Ink.  You can use any paper compatible with your ink.  The images were colored with the following combo -  (Purple flower - BV000, BV00, BV13, BV17, Frog - YR21, YR18, Y11, YG13, YG17, YG67, W3, Dragonfly - V00, V05, V09, RV00, RV04, RV17, YG11, YG17, YG67, Mushrooms - BV00, BV13, BV17, #40, E41, E44, RV00, RV04, RV17). Die cut the images with the coordinating die.  Cut 3-4 images from pruple cardstock and adhere to the bodies of the frog images for strength.   Adhere the extra pruple cardstock images to the dragon fly by adding Dries Clear adhesive to the body of the dragonfly.   When dry, fan each layer of the wings up for dimension.  Add Nuvo Dandelion Yellow and Bubblegum drops to the mushrooms for a fun whimsical look.   Adhere the frogs, mushrooms and dragonfly with a small amount of double sided mounting tape.

Die cut the borders from the Fleur Border Basics Die and adhere with Designer Dries Clear Adhesive.  Emboss the sentiment, Celebrating Your special Day with Versamark Ink and Fine Detail Black Embossing Powder. Heat Set.  Cut with an oval die and mount with a purple oval die slightly larger.   Adhere to the last page, under the frog.

Create a water lily flower by cutting the lily pad freehand from green cardstock.   Create the water lily with the Sun Kissed Fleur Stamp and die set.   The flower petals were cut  with the coordinating die and sponged the Guacamole for the green leaves and Squeezed Lemonade for the flower petals. They were shaped with the Deluxe Flower Shaping tool and adhered with Dries Clear adhesive.  The stamen were adhered with glue.   An 8 inch piece of goldenrod quilling strip (or 1/8 inch lightweight cardstock) was coiled tight with a quilling tool.  A 1/4 inch purple strip was clipped along the side with a fine scissor and wrapped around the yellow coil.  It was adhered on top of the stamen for the flower center.
 







Good Luck to you!



Tuesday, August 8, 2017

Twas the Night Before Christmas

\
I am so glad you stopped by!    
Today I am sharing a Christmas card I created using Heartfelt Creations; Winter's Eve Collection.   I love having an opportunity to create a few Christmas cards early and this collection is perfect.   I can just feel the warmth of the fireplace and the now biting my nose when I step outside!  Talk about fun memories! 



Heartfelt Creations Products
Winter's Eve Paper Collection, HCDP1-281
Winter's Eve Cling Stamp Set, HCPC-3796
Window Frame Cling Stamp Set HCPC-3794
Window Fame Die Set, HCD1-7148
Window Box Elements Die, HCD1-7150
Window Box Fillers Cling Stamp Set, HCPC-3795
Window Box Fillers Die, HCD1-7149
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die Set, HCD1-766
Designer Dries Clear Adhesive, 159723
Metal Adhesive Tip, 352854
Glue Pins, Pin6
Bright Ideas Prills, ANC 850
Darice Double Sided Adhesive Foam Strips, D120601
Deluxe Flower Shaping Kit, HCST1-401
Scor-Pal Measuring Scoring Board, 173842
Stack Store Daubers, HCDA1-449
Memento Desert Sand Dye Ink, TSMP804
Guacamole Fluid Chalk Ink Pad, 71058
Berrylicious Fluid Chalk Ink Pad, 71053
Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Thin die Adapter, 532423-Kit
Clear Cardstock, GBKK811B1
White Cardstock, HCPP2-451








Other Products
Red cardstock, paper trimmer, glue gun, heat tool, Clear Crackle Paint, Copic Alcohol Ink Markers (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21, B24, Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00).








Card base is  a top fold card measuring 5 1/2 x 5 1/2 inches.  The base layer was cut at 5 1/4 x 5 1/4 inches and the designer paper was selected from the Winter's Eve Paper Collection.

The poinsettia's were stamped and cut  using the Sparkling Poinsettia Stamp and die set. They were sponged with Guacamole and a touch of Berrylicious fluid Chalk Ink.  They  were shaped with the Deluxe Flower Shaping Kit. The flowers were assembled and allowed to dry.  Clear Crackle Paint was applied to the petals and sprinkled with frosting powder and heat set.  Yellow Prills were applied to the center for stamen.

The holly berries and and focal image  were stamped with Memento Desert Sand Ink. The berries/leaves and focal image were colored with Copic alcohol ink.  I created my own wallpaper you can see through the window pane.   The color combo was - (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21,  Christmas Balls - B00, B21, B24, B27,  Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00).

The window and window shutters were cut from theWindow Fame set.   Die cut the window frame  3 times and adhere  for extra strength.  Clear cardstock was was cut and adhered on the underside of the window frame.

Adhere the flowers and  holly bush with a glue gun.   Darice foam strips were adhered between the focal image and the window frame.  The frame was then adhered to the card with Designer Dries Clear Adhesive.    








































Thank you for stopping by and I hope you check out Heartfelt Creations; Winter's Eve Collection and check out all the great projects from my Teamies!   You can see links to thier blog on my sidebar!

 


Tuesday, August 1, 2017

Heartfelt Creations - A Vintage Festive Christmas





Welcome!   I am so glad to have you here!   


Festive Holly Paper Collection, HCDP1-280
Festive Holly and Cardinals Cling Stamp Set, HCPC-379
Festive Holly and Cardinals Die Set, HCD1-7145
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die Set, HCD1-7110
Designer Dries Clear Adhesive, 159723
Metal Adhesive Tip, 352854
Glue Pins, Pin6
Deluxe Flower Shaping Kit, HCST1-401
Double Dimensional Foam Dots, DDots
Scor-Pal Measuring & Scoring Board, 173842
Stack & Store Daubers, HCDA1-449
Memento Desert Sand Dye Ink, TSMP804
Berrylicious Fluid Chalk Ink Pad, 71053
Guacamole Fluid Chalk Ink Pad, 71058
Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit









White Cardstock, black cardstock,  X-Press It Blending Cardstock, Misty,  trimmer, heat tool, red ribbon, glue gun, Copic Markers (Berries - R20, R21, R22, R24, Cardinal - R00, R20, R21, R22, C1, C3 and C5), Vintage Photo Distress Ink, Black Soot Distress Ink, Clear Crackle Paint,  Darice brass plated candle lamp and Christmas Eve SVG









  • Cut the lamp from the Christmas Eve SVG file and assemble per the instructions.  Black cardstockwas used for the frame and the designer paper was from the Festive Holly Paper Collection.  Thread a Darice brass planted candle lamp through the SVG frame. the edges of the lamp were sponged with Black Soot Distress Ink to give a vintage look.
  • Stamp the holly leaves and cardinal on X-Press it Blending Cardstock Guacamole ink.  Do not be concerned about the berries and cardinal being stamped with a light green.  Green is a complement to red and will appear a light brownish color .   This will add dimension and contour to your image.  The following Copic color combo was used - (Berries - R20, R21, R22, R24, Cardinal - R00, R20, R21, R22, C1, C3 and  C5).   Die cut with the coordinating die. The leaves were gently shaped with the Deluxe Flower Shaping Kit.


  • The Classic Rose stamp was stamped on white cardstock using Desert Sand Dye Ink and die cut using the coordinating Classic Rose Die.   For a vintage look, the leaves were sponged with Vintage Photo Distress Ink and a small amount of Berrylicious Fluid Chalk Ink.  The petals were lightly misted with water and shaped with the Deluxe Flower shaping Kit.   Crackle Paste was applied and sprinkled with Frosting Powder. The petals were heat set.   Emma Lou has a wonderful tutorial on creating roses HERE


  • A christmas red ribbon was tied around the street lamp. The holly and cardinal images, and roses were applied  with a glue gun.  Safety Alert - This can be plugged into a light socket but make certain to not leave it unattended.  



I also want to share another classic Christmas card featuring the Festive Holly and Cardinals Stamp and Die set fro Heartfelt Creations.    It's another take on Merry and Bright! 






Festive Holly Paper Collection, HCDP1-280
Festive Holly and Cardinals Cling Stamp Set, HCPC-379
Festive Holly and Cardinals Die Set, HCD1-7145
Designer Dries Clear Adhesive, 159723
Metal Adhesive Tip, 352854
Glue Pins, Pin6
Deluxe Flower Shaping Kit, HCST1-401
Double Dimensional Foam Dots, DDots
Scor-Pal Measuring & Scoring Board, 173842
Stack & Store Daubers, HCDA1-449
Gala glitz - White, 12Wht
Memento Desert Sand Dye Ink, TSMP804
Berrylicious Fluid Chalk Ink Pad, 71053
Guacamole Fluid Chalk Ink Pad, 71058
Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit








Red cardstock, double sided adhesive, trimmer,  heat tool, glue gun,  mounting tape,  Distress Tool, Copic Alcohol Ink Markers (Lantern - Y11, YR20, YR21, YR23, YR14, Berries - R20, R21, R22, R24, Cardinal - R00, R20, R21, R22, C1, C3, C5  and  opaque white ink).  X-Press It Blending Cardstock, Misty. 








  • Create a 5 1/2 x 5 1/2 inch white card base.  Cut a base layer from red cardstock at 5 1/4 x 5 1/4 inches. Distress the edges.  Cut the designer paper from the Festive holly Paper Collection at 5 x 5 inches. Distress edges.  Apply Clear Crackle Paint to the corners and edges.  Sprinkle with frosting powder and heat set.   Distress the edges.  Add green metallic brads to corners.  Adhere the layers to the card base as shown.


  • Stamp the holly, berry and cardinal image and Lantern with Memento Desert Sand Ink.  Color the images with the following Copic color combo -  (Lantern - Y11, YR20, YR21, YR23, YR14, Berries - R20, R21, R22, R24, Cardinal - R00, R20, R21, R22, C1, C3, C5  and  opaque white ink). Cut the images with the coordinating die.  Cut 3-4 additional lantern images from brown cardstock.  Adhere them together with clear adhesive in order to add extra strength to the lantern.   Sponge the leaves with Guacamole and Berrylicious Fluid Chalk Ink.  Lightly mist the leaves with water and gently shape with the Deluxe Flower Shaping Kit.   

  • Apply Dries clear Adhesive around the base and side of the lantern.  Sprinkle white Gala Glitz and allow to dry.  Adhere the  the lantern, cardinal and leaves with a glue gun.   Cut the sentiment from the Festive Holly paper collection and  adhere with dimensional foam dots to complete your festive card.   



Thank you so much.  I hope you check out the wonderful Festive Holly Collection at Heartfelt Creations.   Out design team really knocked themselves out for you!