Tuesday, July 25, 2017

Heartfelt Creations - Wishing You a Magical Season



Hello everyone!   Welcome to Inspiration Wednesday at Heartfelt Creations!   today I have a card using the Holly Berry Jingle Stamp Set.   I hope you enjoy it!  




Festive Holly Paper Collection, HCDP1-280
Holly Berry Jingle Stamp Set, HCPC-3793
Holly Berry Die Set, HCD1-4147
Festive Holiday Die Set, HCD17146
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die, HCD1-766
Memento Desert Sand Dye Ink Pad, TSMP804
Memento Olive Grove  Dye Ink Pad, TSMP708
ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053
ColorBox Fluid Chalk ink Pad - Guacamole, 71058
Deluxe Flower  Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive, 352854
Scor-Pal Measuring & Scoring Board, 173842
Stack & Store Daubers, HCDA1-449
White Cardstock, HCPP2-451
Rajni Chawla's Frosting Powder, PGM15015
Bright Ideas Prills, ANC852

Pumpkin cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers (Pomegranate R00, R11, R20, R22, R24, R56, YG11, YG61 - Leaves YG99, YG95, YG93, YG91, Berries R20, R22, R24, R27, R58, opaque white ink - Cinnamon Stick E00, E11, E13, E15, E19, E08), Clear Crackle Paint, heat tool, paper trimmer, double sided tape, mounting adhesive, glue gun, Gemstone  Embossing Folder, flower stamens, Vintage Photo Distress Ink. 



Create a 5 1/2 x 5 1/2 inch top folding card using heavy white cardstock.  Cut and adhere pumpkin base layer cut at 5 1/4 x 5 1/4 inches using double sided tape for extra strength.   Select the yellow designer paper from the Festive Holly Paper Collection.  Cut at 5 x 5 inches.  Apply Vintage Photo Distress Ink to the Gemstone Embossing Folder and emboss the designer paper.   Sponge edges with the Vintage Photo Distress Ink.  Apply Clear Crackle Paste to the edges and sides of the designer paper and sprinkle with Frosting Powder.  Heat set until it turns white.  Adhere designer layer to the card.   Die cut the Festive Holiday decorative die  from pumpkin cardstock and adhere it to the upper part of the card as shown.  

Stamp the pomegranate using the HollyBerry Jingle Stamp Set.   I used Olive Grove ink on X-Press It Cardstock.  The image was colored with the following marker combos - Pomegranate -  R00, R11, R20, R22, R24, R56, YG11, YG61 - Leaves -YG99, YG95, YG93, YG91, Berries - R20, R22, R24, R27, R58, opaque white ink - Cinnamon Stick - E00, E11, E13, E15, E19, E08.  Die cut with the coordinating die. Apply Clear crackle Paint and sprinkle with the frosting powder.  Heat set.  Die cut 4 pomegranate images from dark green cardstock from your stash.  Adhere them together with your focal image.   This will allow extra strength to the image.  

Stamp the poinsettia flowers  from the Sparkling Poinsettia stamp set on white and green cardstock with Desert Sand Ink.  I selected this ink so I could have an invisible line and could use it for the two different colored flowers.   I used the largest petal  for my green leaves.  Cut the petals using the Sparkling Poinsettia Die Set.  Sponge with Berrylicious and Guacamole Chalk Ink.  Lightly spritz the petals with a water mini mister and  shape the petals with the Deluxe Flower Shaping Kit.  Adhere the layers and apply the Crackle Paint, sprinkle with frosting powder and heat set. 

Apply the focal image with dimensional dots and adhere the poinsettia's with a glue gun to finish your  festive Holiday card. 
  

Thank you so much for stopping by!    I hope you have a wonderful day!   I will be positing a watercolor and quilled crd for you in a couple days so come back soon!












Tuesday, July 18, 2017

Heartfelt Creations - Just a Country Christmas




Hello everyone!   I don't know about you but we are experiencing triple digit temperatures in the Valley Springs area of California!   Whew!  I could use some of the chilly, snowy weather that bites your nose when you walk outside the door!  LOL   

Today I created a card with the Festive Holly Stamp and Die set from Heartfelt Creations!  ðŸ’•ðŸ’•  
I hope you enjoy it.   I have all products and details listed.  Don't hesitate to ask if you have any questions!    



Festive Holly Paper Collection, HCDP1-280
Festive Holly Stamp and Die Set, HCPC-3792
Festive Holly Die Set, HCD1-7146
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive, 352854
Sizzix Vagabond 2,  532423
Scor-Pal Measuring and Scoring Board, 173842
Double dots 3 D Foam Circles, DDots
Stack & Sore Dauber, HCDA1-449
White Cardstock, HCPP2-451
Rajni Chawla's Frosting Powder, PGM15016
White Embossing Powder, RPEJ685
Memento Tuxedo Black Ink, TSMP900


Olive Green Cardstock, trimmer, Misty, Copic Alcohol Ink Markers (Birds R20, R22, R24, R27, C1, C3, C5, C7 - Berries R20, R22, R24, R59 - Leaves YR13, YG61, YG63, YG67, GY95 - Wheel E30, E33, E35, E37, E47), Versamark Ink, Heat Tool, White Gel Pen, Ranger Vintage Photo Distress Ink,  rhinestone, Clear Crackle Paint, X-Press It Blending Cardstock. 



Cut a top fold card at 5 1/2 x 5 1/2 inches from heavy white cardstock. Cut the base layer from olive green cardstock at 5 1/4 x 5 1/4 inches.  Cut the designer paper from Festive Holly Collection at 5 x 5 inches.   Add some additional snow with the gel pen on the designer paper and sponge edges with Vintage Photo Distress Ink using Stack & Store Daubers.   Add some twine and adhere the layers with double sided tape.   
Stamp the image with the cardinals and the wheel from the Festive Holly Stamp Set onto Copic compatible paper.  I used X-Press It.  The image was colored with the following Copic color combo - (Birds R20, R22, R24, R27, C1, C3, C5, C7 - Berries R20, R22, R24, R59 - Leaves YR13, YG61, YG63, YG67, GY95 - Wheel E30, E33, E35, E37, E47).   Die cut the image with the coordinating die.  Cut 4 additional die cut images from dark brown or black cardstock.   Adhere the layers of the brown die cut on top of another and adhere to the colored image using Dries Clear Adhesive.  This will add strength and some dimension to the focal image.  Pop up the focal image on the left side of the card using dimensional foam dots. 

Stamp the sentiment with Versamark Ink and emboss with white powder. Heat set.  Die cut with a tag tie and add snow using various size dots with a white gel pen.   Pop the tag up using dimensional dots and apply a rhinestone to the bow.  
Apply a generous coat of Clear Crackle Paint the the bottom of the card and to the top of the wheel as shown.   Sprinkle with a generous amount of Frosting Powder and heat set.   This will complete a winter, snowy look to your holiday card. 





Mail?!!!    Is that box for me from Heartfelt Creations? 💕
Thank you for stopping by and don't hesitate to ask any questions you may have!    



Tuesday, July 11, 2017

Heartfelt Creations - With Love at Christmas Time
















Celebrate the “holly-day” season with the new Festive Holly Collection by Heartfelt Creations!  Charming and elegant, with a hint of a country feel, this festive collection is filled with heartwarming imagery of falling snow, towering pine trees, and beautiful wildlife all woven together with lavish illustrations of abundant holly and berry clusters!  Immerse yourself in a paper collection revealing a traditional holiday color palette of rich reds and fir greens accentuated with sky blues, antique golds and crisp whites all melting together creating perfect backdrops to graceful background imagery of hand stamped post marks, floating music notes, delicate snowflakes, ribbon like swirls and lace like accents.  A charming assembling of three delightful cling stamp sets boast enchanting illustrations of red feathered cardinals, abundant holly and berry clusters as well as an antique candle lit lantern and vintage wooden wheel all at the ready to be paired with the coordinating dies and transformed into exquisite dimensional Yuletide embellishments!  An elegant, lacy decorative arch shaped die lends itself perfectly to create a breathtaking accent or die cut within your card front itself adding a touch of delightful holiday magic, while ornamental sleigh bells ready themselves to ring in the merriest of seasons!  Join us as we prepare for the Christmas festivities with the new Festive Holly Collection!























Festive Holly Paper Collection, HCDP1-280
Holly Berry Jingle, HCPC-3793
Holly Berry jingle Die, HCD1-4147
Festive Holiday Cling Stamp Set, HCPC-3792
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die, HCD1-766
Desert Sand Memento Dye Ink, TSMP804
ColorBox Fluid Chalk Ink- Berrylicious, 71053
Memento Cottage Ivy Dye Ink, TSMP701
ColorBox Fluid Chalk Ink - Blue Iris, 71034
Double dots 3 D Foam Circles, Dots
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive, 352854
Scot-Pal Measuring and Scoring Board, 173842
Sizzix Vagabond 2, 532423
Rajni Chawla's Frosting Powder
Stack & Store Daubers, HCDA1-449
White Cardstock, HCPP2-451
Embossing Powder - White, REJ685




Olive green cardstock, bright red cardstock,  X-Press It Blending Cardstock,  Copic Alcohol Ink Markers (Cardinal - R00, R20, R21, R22, T1, T2, YR24, YR28, Berries- RV55, RV63, RV86, Leaves - YG11, YG61, YG65), paper trimmer, hot glue gun, Misty, flower centers, Clear Rock Candy Crackle Distress Paint, white gel pen, heat tool.  









Create a 5 1/2 x 5 1/2 inch top folding card with heavy white cardstock.  Cut base layer from bright red cardstock at 5 1/4 x 5 1/4 inches.  Select the dark green designer paper from the Festive Holly Paper Collection and cut at 5 x 5 inches.  Apply a thin coat of crackle paint to the corners of the designer paper and sprinkle with Rajni's Frosting Powder.   Heat set to add a frosty, winter look.   As you apply heat to the frosting, it will become with and bubbles will appear.   Adjust the amount of whiteness and bubbles to your liking.   Apply various sizes of dots on the designer paper with white gel pen to give a snowy appearance.  Allow to dry and adhere the layers with double sided tape for added strength. 

Stamp the sentiment from the Festive Holly Cling Stamp Set with Versamark on the designer layer as shown.  Sprinkle with white embossing powder and heat set. 

Stamp the cardinal image from  Holly Berry Jingle Stamp Set with Desert Sand Ink on X-Press It paper.    Color the image with the following Copic Markers - (Cardinal - R00, R20, R21, R22, T1, T2, YR24, YR28, Berries- RV55, RV63, RV86, Leaves - YG11, YG61, YG65). Cut image with coordinating die.  Cut 3-4 additional die cuts of the image from dark green cardstock and adhere to each other for strength. 

Stamp the flower image from the Sparkling Poinsettia Stamp Set.  Sponge edges with a light touch with Berrylicious Ink.  Sponge the leaves with Cottage Ivy , Berrylicious and blue Iris Ink.   Shape the flowers using the Deluxe Flower Shaping Kit and assemble.   Emma Lou has a great tutorial on shaping the poinsettias HERE > https://www.heartfeltcreations.us/video/95/create-sparkling-poinsettias-with-vellum-and-stamp-paint.
Apply a light coat of crackle paint to the petals and sprinkle frosting.   Heat set the flowers.     

Apply the focal image to the card with dimensional foam circles.   Apply the flowers with a glue gun to complete your Christmas card.  

Thank you so much for stopping by!   I love having you visit.

  


Tuesday, July 4, 2017

Heartfelt Creations - Best Wishes to the Bride and Groom




It's inspiration Wednesday for Heartfelt Creations.   We are showcasing the gorgeous Classic Wedding Collection!   



Heartfelt Creations Products
Classic Wedding Paper Collection, HCDP1-279
Classic Wedding Bells, HCPC-3789
Classic Wedding Bells Die Set, HCD1-7143
Decorative Medallion Die, HCD17144
Classic Rose Stamp, HCPC-3752
Classic Rose Die Set, HCD1-7110
Memento Desert Sand Dye Ink, TSMP804
Memento Olive Grove Dye Ink Pad, TSMP708
Gold Gala Glitz, 4gld
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
Scor-Pal Measuring and Scoring Board, 173842
Deluxe Flower and Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Vagabond-2, 532423
Cardstock - White, HCPP2-451
Embossing Powder - White, RPE1685
Stack and Store Daubers, HCDA1-449
Dimensional Foam Circles, DDots

Apricot-pink cardstock. 65 lb. white cardstock, olive green cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers, Abandoned Coral Distress Ink, Misty, Copic Alcohol Ink Markers (E000, E11, E21, C0, C1, C3, C5,  C7, B0000, B000, B00, B21, B92, G40, G45, RV81, RV85), double sided tape, heat tool, glue gun, Crackle Paint, mini mister. 

Cut card  base from heavy white cardstock to create a 5 1/2 x 5 1/2 inch top folding card.  Cut the base layer from apricot-pink cardstock at 5 1/4 x 5 1/4 inches.   Cut  the designer paper from the Classic Wedding Paper Collection at 5 x 5 inches.  sponge the edges of the paper with  Abandoned Coral Distress Ink.  Adhere the layers with double sided tape. 

Stamp the bride and groom image from the Classic Wedding Bells Stamp set using Desert Sand Dye and X-Press It Blending Cardstock. You can use any Copic compatible paper.  Color the image with the following Copic Marker color combo ( Skin- E000, E11, E21, Hair and Suit - C0, C1, C3, C5, C7, Wedding Gown and veil - B0000, B000, B00, B21, B92, Bouquet - G40, G45, RV81, RV85).   Die cut with the coordinating die.   Cut  three or four additional images with the die from dark green cardstock.  Adhere the layers using Designer Dries Clear Adhesive.  This will provide dimension and strength to the focal image.   Apply a thin coat of Dries Clear Adhesive  to the image and lightly sprinkle with Crystal Clear Glitter.   

Die cut the Medallion from light blue cardstock and the coordinating mat from the green cardstock.   Lightly dot the medallion with Dries Clear Adhesive and apply to the dark green medallion mat.     Adhere the medallion  to the card base as shown.   

Stamp Classic Roses image on light weight white cardstock using white embossing powder. Heat set the flowers.   Stamp the leafs with he Classic Rose Stamp set using Olive Green ink.   Die cut with the coordinating die sets.   Sponge the flowers with Abandoned Coral Distress Ink.  Sponge the leaves with Olive Green and Abandoned Coral ink.   Die cut the roses and leaves.   Shape the flowers and leaves with the Deluxe Flower Shaping Kit.  Allow to dry and  adhere the layers.   You can view a wonderful tutorial on flower shaping dimensional roses HERE.  Lightly brush the flower petals with Crackle Paint and sprinkle with Frosting Powder.   Heat set.   

Apply Dries Clear Adhesive to the card base as shown and sprinkle Gold Gala Glitz and allow to dry.  Apply dimensional foam dots to the focal image and adhere over the Gold Gala Glitz.   Arrange and adhere the leaves and flowers with a glue gun.    




Thank you for stopping by!   I hope you are having a wonderful week!