Heartfelt Creations - Thinking of You - Special Launch

Hello to all my friends!   

It's is Inspiration Wednesday  at Heartfelt Creations and we have a special  treat for you this week.   Today we have a special launch for you.  I am showcasing the Eyelet Lace Frames Die.  It is gorgeous!    

HCDP1-289, Butterfly Dreams Paper Collection

HCD2-7193, Eyelet Lace Frames Die

HCPC-3651, Botanical Rose Cling Stamp

HCD1-758, Botanical Wings Die

HCPC-3656, Delightful Daisy Cling Clamp Set

HCD1-760, Delightful Daisy Die

HCPC-3812, Singing in the Rain Stamp Set - Raindrop Sentiments 

HCD1-754, Eyelet Circle and Basics Small Dies

HCS1-459-1, Assorted Pearl Stamens - Small

159723, Designer Dries Clear Adhesive

352854, Glue Tips - Metal

HCST1-401, Deluxe Flower Shaping Kit

HCDA1-450, Stack and Store Daubers - Pack of 6

173742, Scor-Pal Measuring and Scoring Board

HCPP3-452, 12 x 12 inch Cardstock - White

359848, Spellbinders Tool N' One

315947, 3D Stamp Paste - Violet Metallic

284095, 3D Stamp Paste - Grass Green

TSMP804, Memento Dye Inkpad - Desert Sand

TSMP708, Memento Dye Inkpad - Olive Grove

TSMP501, Memento Dye Inkpad - Lilac Posies

TSMP507, Memento Dye Inkpad - Elderberry

532423-Kit, Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter

Gold cardstock, purple cardstock, 65 lb. white cardstock, mounting tape, glue gun, Memento Dye Inkpad - Dandelion and Grape Jelly, Mini-Mister, styrofoam round flower centers. 

Create a 5 3/4 x 8 inch card from a 12 x 12 inch  heavy white cardstock.  Cut a base layer at 5 1/2 x 7 3/4 inches from dark purple cardstock.  Adhere the layers using double sided tape, flower stigma.

Cut a frame die from the new release - Eyelet Lace Frame Die from gold cardstock.  I use wax paper between the die and cardstock for easy release of the paper from the die.  Any remaining pieces that may have not released from the cardstock can be removed using the Tool N' One.   Adhere the lace frame to the purple base layer.  

Stamp the flower petals from the Botanical Rose Stamp Set and the Delightful Daisy Stamp Set using Memento Desert Sand ink.   Die cut with the coordinating die.   Sponge the Botanical Rose petals with Memento Grape Jelly and then blend out slightly with Lilac Posies.  Allow the ends  of the petals to remain white.  Lightly sponge the center of the daisy petals  with Olive Grove ink and the inner part of each petal with yellow.  Blend toward  petal tips but leave the end of the petals white as shown.  Using the sharp tip from the Deluxe Flower Shaping Kit, puncture a hole in the center of each petal.  Mist the petals with a mini-mister lightly on the back and shape with the Deluxe Flower Shaping Kit. Allow to dry.   Using a craft brush, paint the styrofoam center (stigma) with 3D Paint.  purple and green.   allow to dry.   Assemble the petals, stigma and stamen using a hot glue gun.  Sponge the leaves with the green ink and shape with the Deluxe Flower Shaping Kit.   Adhere the the flowers and leaves.   Add additional  green and purple flower centers to  the arrangement.  

Stamp the sentiment from the Singing in the Rain Collection - Raindrop Sentiments using Elderberry Ink on heavy white paper.   Die cut the sentiment and purple mat layer using the nesting Eyelet Circle and Basics Small Dies.  Pop the sentiment up on the purple circle mat using mounting tape.   Add another strip of mounting tape to the sentiment and mount in the center of the card.  

Fussy cut the butterfly from the Butterfly Dreams paper collection.  Attach the two black stamen for the antennas.   Adhere the butterfly above the sentiment using Designer Dries Clear Adhesive.   

Thank you for stopping by and and hope you found this card inspirational and easy instructions!  

Hugs!  

Santa's Reindeer House

Can you hear the bells ringing?   

The Holiday time is almost here and San'a's Reindeer are resting up for the big day!    

Heartfelt Creations Products

HCPC-3822, Poinsettia and Holly Clusters Cling Stamp Set

HCD1-7176 , Poinsettia and Holly Clusters Die

HCDP1-285, Camelia Carnation Paper Collection

HCFB1-463, Poinsettia Shaping Mold

HCST1-401, Deluxe Flower Shaping Kit

HCDA1-450, Stack and Store Daubers - Pack of 6

ANC852, Bright Ideas Prills - 12 Pack

159723, Designer Dries Clear Adhesive

352854, Glue Tips - Metal

Pin6, Glue Pins

HDPP3-452, 12 x 12 Cardstock - White

PGM15015, Rajni Chawla's Crystal Clear Glitter

TSMP400, Memento Dye Ink Pad - Rose Bud

TSMP708, Memento Dye Ink Pad - Olive Grove

532423-Kit, Sizzix Vagabond 2 with Solo Wafer Thin Adapter

173742, Scor-Pal Measuring & Scoring Board

SVG file - Santa's Sweets,  electronic die cutter,  green cardstock, candy canes, pipe cleaners, felt pom poms, texture paste, palate knife, google eyes, glue gun, Copic Markers for candy cane house trim -  (R20, R22, R24, R27),  flower rhinestone, 

Using Santa's Sweets SVG file, cut the house with an electronic die cutter. The svg file can be found HERE.    The step by step instructions are included and very straight forward.   Use the Camelia Carnation Designer Paper for the trim and panels.   The candy cane embellishments on the corners of the house were cut on white cardstock and the candy cane coloring was applied with Copic alcohol ink markers - (R20, R22, R24, R27).

Apply texture or molding paste to the roof and sides of the house.   Sprinkle with Crystal Clear Glitter while the texture paste is still wet.  Allow to air dry.     

Cut the poinsettias and holly using the Poinsettia and Holly Cluster stamp set.    Sponge the poinsettias with Lipstick Red ColorBox Ink and the Holly with Olive Grove Ink.   The tips of the Stack and Store Daubers are pointed and work well with the small flowers.    Lightly mist the petals and shape with the Poinsettia and Holly Cluster mold.   Additional shaping can be done with the Deluxe Flower Shaping tool, if desired.   Yellow prills were adhered to the centers with Designer Dries Clear Adhesive.  Adhere to the reindeer house.   

The candy cane reindeer were created with pipe stems, google eyes and little red pom poms.  A glue gun works best but be careful of your fingers!  The flower rhinestone was adhered to the front of the door with Dries Clear Adhesive.   

Thank you for stopping by and I hope you have a safe and wonderful Holiday Season! 

Heartfelt Creations - A Warm Winter's Eve

Welcome!   

It's Inspiration Wednesday for heartfelt Creations!   This month is featuring the Winter's Eve Collection.    I love this collection and the warm, festive feel that comes over me when I look in the window!    I couldn't resist adding the Blazing Poppy flowers for a little "POP".   

Heartfelt Creations Products

Winter's Eve Paper Collection, HCDP1-281
Window Frame Cling Stamp Set HCPC-3794
Window Fame Die Set, HCD1-7148
Decorative Medallion Die, HCD1-7144
Blazing Poppy Petals Stamp Set, HCPC-3674

Designer Dries Clear Adhesive, 159723

Metal Adhesive Tip, 352854

Glue Pins, Pin6

Darice Double Sided Adhesive Foam Strips, D120601

Scor-Pal Measuring & Scoring Board, 173842

Stack & Store Daubers, HCDA1-449

Memento Desert Sand Dye Ink, TSMP804
Memento Rhubarb Stalk Dye Ink, TSMP301

Colorbox Fluid Chalk Ink Pad - Berrylicious , 71053

Colorbox Fluid Chalk Ink Pad - Guacamole , 71058
Colorbox Fluid Chalk Ink - Chambray, 71078

Clear Cardstock, GBKK811B1
White Cardstock, HCPP2-451

Deluxe Flower Shaping Kit, HCST1-401

Teal Gala Glitz, 6teal

Prills - Power Outage, ANC845

Rajni Chawla's Frosting Powder, PGM15015

Vagabond 2 with Solo Wafer-Think die Adapter, 532423-Kit



Kraft cardstock, X-Press It Blending Cardstock, heat tool glue gun, Copic Alcohol Ink Markers (Candle -  R81, R85, R89, T2, Flame - E47, E35, Y02, Berries - R30, R35, R39, Leaves - YG11, YG45, G28 G46), White gel pen, Clear Crackle Paint, Vintage Photo Distress Ink, double sided tape.

Create a top fold 5 1/2 x 5 1/2 inch white card base. Cut a base layer from kraft cardstock at 5 1/4 x 5 1/4 inches.   Select the designer paper as shown and cut at 5 x 5 inches.   Apply Clear Crackle paint to designer paper on left side of the paper, sprinkle with frosting powder and heat set.  Apply Designer Dries Clear on the left side of designer paper and apply Teal Gala Glitz. Allow to dry.   Adhere the layers to the card base with double sided tape.

Stamp window frame and candle with Memento Desert Sand Ink.   I used X-Press Blending Cardstock for the candle because I colored it with Copic Markers and designer paper from the Winter's Eve Paper Collection for the window frame.   The window frame was sponged with Vintage Photo Distress Ink.   The light yellow green designer paper was selected to back the window frame.  It was sponged with Vintage Photo.    The Candle was colored with the following color combo - ((Candle -  R81, R85, R89, T2, Flame - E47, E35, Y02, Berries - R30, R35, R39, Leaves - YG11, YG45, G28 G46).   The holly leaves were  accented with a white gel pen.   The images were cut with the coordinating die.

The Blazing Poppy Petals Stamp Set  was stamped on white cardstock with Rhubarb Stalk  Memento Ink.   The flowers were die cut with the coordinating die.   The petals were sponged with Berrylicious Fluid Chalk Ink, misted with water and shaped with the Deluxe Flower Shaping Kit,  They were assembled using Designer Dries Clear Adhesive.  Power Outage Prills were applied to the center of each Poppy.    The Classic Leaf stamp set was stamped with Guacamole Fluid Chalk Ink and die cut with coordinating die.   the petals were sponged with Guacamole, Chambray and a small amount  of Berrylicious Fluid Chalk Ink.  The petals were shaped with the Deluxe Flower Shaping Kit and allowed to dry.   Clear Crackle Paint was applied to the leaves and dusted with Frosting Powder.  The leaves were heat set.

Die cut the Decorative Medallion from white cardstock.    Place clear cardstock under the window frame.   Pop the frame up from the yellow-green designer paper with Darice foam strips.  Adhere the window to the card  on top of the medallion as shown.  Adhere the leaves and flowers with a glue gun.

Embellish with with various sized dots from a white gel pen to look like snow. Apply more dots in the upper corners with the  white gel pen.

  Emma Lou's Tutorial on creating flowers with the Blazing Poppy Petal Set can be found HERE. 

Thank you so much for stopping by!   I hope you enjoyed my take on this stamp and die set and that you check out the wonderful inspiration from my other team members!   

Twas the Night Before Christmas

\

I am so glad you stopped by!    

Today I am sharing a Christmas card I created using Heartfelt Creations; Winter's Eve Collection.   I love having an opportunity to create a few Christmas cards early and this collection is perfect.   I can just feel the warmth of the fireplace and the now biting my nose when I step outside!  Talk about fun memories! 

Heartfelt Creations Products
Winter's Eve Paper Collection, HCDP1-281
Winter's Eve Cling Stamp Set, HCPC-3796
Window Frame Cling Stamp Set HCPC-3794
Window Fame Die Set, HCD1-7148
Window Box Elements Die, HCD1-7150
Window Box Fillers Cling Stamp Set, HCPC-3795
Window Box Fillers Die, HCD1-7149
Sparkling Poinsettia Cling Stamp Set, HCPC-3680
Sparkling Poinsettia Die Set, HCD1-766

Designer Dries Clear Adhesive, 159723

Metal Adhesive Tip, 352854

Glue Pins, Pin6

Bright Ideas Prills, ANC 850

Darice Double Sided Adhesive Foam Strips, D120601

Deluxe Flower Shaping Kit, HCST1-401

Scor-Pal Measuring Scoring Board, 173842

Stack Store Daubers, HCDA1-449

Memento Desert Sand Dye Ink, TSMP804

Guacamole Fluid Chalk Ink Pad, 71058
Berrylicious Fluid Chalk Ink Pad, 71053

Rajni Chawla's Frosting Powder, PGM15015
Vagabond 2 with Solo Wafer-Thin die Adapter, 532423-Kit
Clear Cardstock, GBKK811B1
White Cardstock, HCPP2-451

Other Products
Red cardstock, paper trimmer, glue gun, heat tool, Clear Crackle Paint, Copic Alcohol Ink Markers (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21, B24, Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00).

Card base is  a top fold card measuring 5 1/2 x 5 1/2 inches.  The base layer was cut at 5 1/4 x 5 1/4 inches and the designer paper was selected from the Winter's Eve Paper Collection.

The poinsettia's were stamped and cut  using the Sparkling Poinsettia Stamp and die set. They were sponged with Guacamole and a touch of Berrylicious fluid Chalk Ink.  They  were shaped with the Deluxe Flower Shaping Kit. The flowers were assembled and allowed to dry.  Clear Crackle Paint was applied to the petals and sprinkled with frosting powder and heat set.  Yellow Prills were applied to the center for stamen.

The holly berries and and focal image  were stamped with Memento Desert Sand Ink. The berries/leaves and focal image were colored with Copic alcohol ink.  I created my own wallpaper you can see through the window pane.   The color combo was - (Berries, tree trim and rug - R20, R22, R24, R27 R56, Leaves - Leaves and tree - G40, G43, G44, Skin Tones E00, E11, E24, Hair - C3, C4, C5, C7, Dress - B0000, B00, B21,  Christmas Balls - B00, B21, B24, B27,  Star - Y11, YR20, YR23, YR56,  Wall paper - E40, E42, B00).

The window and window shutters were cut from theWindow Fame set.   Die cut the window frame  3 times and adhere  for extra strength.  Clear cardstock was was cut and adhered on the underside of the window frame.

Adhere the flowers and  holly bush with a glue gun.   Darice foam strips were adhered between the focal image and the window frame.  The frame was then adhered to the card with Designer Dries Clear Adhesive.    

Thank you for stopping by and I hope you check out Heartfelt Creations; Winter's Eve Collection and check out all the great projects from my Teamies!   You can see links to thier blog on my sidebar!

 

Heartfelt Creations Wildwood Florals Card

Wildwood Florals Cling Stamp Set, HCPC-3769

Wildwood Cottage Florals Die, HCD1-7125

Fleur Border Basics Die, HCD!-7120

White Gala Glitz, 12wht

Deluxe Flower Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159951

White Embossing Powder, RPE1685

ColorBox Fluid Chalk Ink Pad - Berrylicious, 71053

Memento Cantaloupe Ink Pad, TSMP103

Memento Olive Grove Ink Pad, TSMP708

Power Outage Prills, ANC845

Metal Glue Tip, 352852

Glue Tip Pins, Pin6

Scot-Pal Measuring and Scoring Board , 173842
Sizzix Vagabond 2, 532423

White cardstock, green cardstock.  navy cardstock, Versamark embossing ink, mini mister,  sponge dauber,  double sided tape, paper trimmer,  Schmincke Watercolor and brush. .........

Cut white card stock to measure 5 1/2 x 11 inches.  Using Scor-Pal, score and fold at 5 1/2 inches to create a top fold card.   

Die cut the right side of the front card base using the Fleur border Basics Die.  

Cut a navy panel at 5 1/2 inches x 3 1/2 inches.  Cut a white panel at 5 1/2 inches x 3 1/4 inches.  

Adhere the layers to the card base with double sided tape.   

Stamp The flowers on white card stock using Versamark Embossing Ink and sprinkle with white embossing powder.  Heat set and allow to cool.   The flowers were watercolored with light blue, yellow, rose and grey. I wanted to give a variation in the color of the leaves.    The flowers  were die cut and shaped using the Deluxe Flower Shaping Kit.  Emma Lou has a wonderful video on shaping dimensional flowers  > https://www.heartfeltcreations.us/video/129/how-to-create-dimensional-roses   

The pink flowers were sponged with Berrylicious Chalk Ink and the yellow flowers were sponged with Cantaloupe Ink.   The leaves were cut with green card stock and sponged with Olive Grove Ink.   They were lightly shaped with the flower Shaking Kit.   

A light coat of Designer DriesClear adhesive was applied to the flowers and leaves and dipped in White Gala Glitz for a bit of sparkle.  Pearls were added to the center of some of the flowers and Power Outage Prills were applied to one of the flowers.   

Thank you so much for stopping by and come back soon! 

Heartfelt Creations - Flowering Dogwood Collection

Today is another Heartfelt Creations Inspiration Wednesday featuring the Flowering Dogwood Collection.    This collection is perfect to get a jump start on all your Easter cards!    I happen to love birds and dogwood too so this is a collection I would love to use all year!      

Flowering Dogwood Designer Paper Collection, HCDP1-275
Flowering Dogwood Branches Cling Stamp Set, HCPC-3774
Flowering Dogwood Branches Die, HCD1-7130
Flowering Dogwood Cling Stamp Set, HCPC-3773
Flowering Dogwood Die Set, HCD1-7129

White Gala Glitz, 12wht

Deluxe Flower Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159951

White Embossing Powder, RPE1685

Memento Olive Grove Ink Pad, TSMP708

Memento Espresso Truffle, TSMP808

Metal Glue Tip, 352852

Glue Tip Pins, Pin6

Scor-Pal Measuring and Scoring Board , 173842
Sizzix Vagabond 2, 532423
Dimensional Foam Double Dots, DDots

X-Press it Blending Card Stock, heavy white card stock, brown card stock,  Vintage Photo Distress Ink Pad, sponge dauber, mini minster, Paper Trimmer, Copic Alcohol Ink Markers (C1, C3, B91),  Versamark Ink and heat tool.

Cut a 5 1/2 x 5 1/2 inch top folding card base from heavy white card stock.   Cut a base layer from brown card stock measuring 5 1/4 x 5 1/4 inches.   Select the designer paper as shown from the Flowering Dogwood Paper Collection.  Cut designer paper at 5 x 5 inches.   Adhere layers to the card base.

The flower and leaf images were stamped on X-Press It Blending Card Stock.  I stamped the flowers with Espresso Truffle Ink and the leaves with memento Olive Grove Ink using the Flowering Dogwood Cling Stamp Set and cut with the coordinating die.   The flowers were sponged with Vintage Photo Distress Ink and Olive Grove Ink.   The leaves were sponged with Olive Grove Ink.

The dove image is from the Flowering Dogwood Branches Die.   The dove was embossed using Versamark ink and white embossing powder.  The image was heat set.  The image was colored with Copic Alcohol Ink Markers.  The color combo was - C1, C3 and B91.   The dove was cut using the coordinating Dogwood Branches Die.

The flowers where lightly spritzed with a mini mister and shaped using the Deluxe Flower Shaping Kit and adhered with the Designer Dries Clear Adhesive.    Emma Lou has a video that shows how to create dimensional flowers using the Deluxe Flower Shaping Kit here > https://www.heartfeltcreations.us/video/85/how-to-shape-flowers-with-the-deluxe-flower-shaping-kit

The flowers were adhered to the designer paper as shown.   White Gala Glitz was adhered to the paper where the dove would be placed.   The glitz was adhered using Designer Dries clear Adhesive.
The dove was gently shaped using the Deluxe Flower Shaping Kit and hoped up from the card using dimensional dots.

The sentiment was selected from he designer paper collection, sponged and adhered with dimensional foam dots.  

Thank you so much for stopping by!    I hope you enjoy this collection and check out the gorgeous creations from my team mates. Their links can be found on my sidebar!