Heartfelt Creations - Come Fly with Me

HCPC-3800 Young At Heart Stamp Set
HCD1-7158 Young At Heart Die
HCPC-3802 Good Times Sentiments Stamp Set
HCDP1-283 Young At Heart Paper Collection
HCPC-3801 Simply Classic Stamp Set
HCD1-7159 Simply Classic Die
HCD1-754 Eyelet Circle and Basics Small Dies
HCPC-3773 Flowering Dogwood Cling Stamp Set
HCD1-7129 Flowering Dogwood Die
HCST1-401, Deluxe Flower Shaping Kit
HCDA1-449, Stack & Store Daubers
SKU-173842, Scor-Pal Measuring and Scoring Board
532423-kit, Vagabond-2 w/Solo-Wafer Thin Die Adapter
359848, Spellbinders Tool n’ one
HCPP2-451, White Cardstock, 8 ½ x 11
TSMP900, Memento Dye Inkpad –Tuxedo Black
71012, ColorBox Fluid Chalk Inkpad – Olive Pastel
71015, ColorBox Fluid Chalk Inkpad – Rouge
159723, Designer Dries Clear Adhesive
352854, Glue Tips – Metal
Pin6, Glue Pins
245125, 3-D Crystal Lacquer
ANC852, Bright Ideas Prills – 12 Pack
RPEJ685, Embossing Powder - white



Blue cardstock, mounting tape, double sided tape, glue gun, rhinestones, Copic Markers (Airplane – Y11, Y13, Y18, Yr24, B20, B21, B24, B26, B29), Ranger Distress Ink- Fossilized Amber, heat tool, Versamark Ink.




A Video showing how to shape the Dogwood flowers using the Deluxe Flower Shaping Kit can find it > https://youtu.be/gI8RqHAt3vE.

• Create a 5 ½ x 5 ½ inch top-fold card base from heavy white cardstock. Cut two base layers measuring 5 ¼ x 5 ¼ inch from blue cardstock. One will be adhered to the front of the card and reserve the second piece. Cut the map designer paper from the Young At Heart Paper Collection at 5 in. x 5 in. Adhere the layers with Double sided tape. Die cut the center circle using the Eyelet Circle and Basics Small Dies. Cut an eyelet circle, using two nesting die and adhere to the front of the card using Designer Dries clear Adhesive. 

• Stamp the airplane from the Young At Heart Stamp Set. I used Tuxedo Black Memento Ink and X-Press It Blending Cardstock because the image was colored with Copic Alcohol Markers (Y11, Y13, Y18, Yr24, B20, B21, B24, B26, B29). Die cut the airplane and three additional images from blue cardstock. Adhere the layers of the airplane together for added strength using Designer Dries clear adhesive. Apply 3 D Crystal Lacquer to the propeller and the blue trim for shine and added dimension. Adhere to the front of the card as shown with a glue gun. 

• Stamp the sentiment from the Simply Classic Cling Stamp Set with Versamark Ink and heat set using white detail embossing powder. Apply to the inside of the card. 

• Stamp the flowers from the Flowering Dogwood Stamp Set using Rouge Fluid ColorBox Chalk Ink. Sponge the center with Ranger Fossilized Amber Ink and the edges of the petals with Rouge ColorBox Fluid Chalk Ink. Stamp the leaves from the Simply Classic Cling Stamp Set and sponge with ColorBox Olive Pastel Ink. Shape the flowers using the Deluxe Flower Shaping Kit and allow to dry. Adhere You Got Me At Yellow Prills in the center using Designer Dries Clear Adhesive. Shape the leaves and adhere around the base of the circle. Adhere the flowers with a glue gun. 

Thank you for stopping by and have a wonderful day! 

Heartfelt Creations - Exciting New Product Release

Hello Friends! I want to share the exciting "extra" new  product release for this month. Heartfelt Creations has just added two new and exciting products for all you crafters to play with. Have you seen all the gorgeous foam flowers that pop up every now and then? I know I have and have loved all the stunning foam flowers that I have seen on social media. The great news is that the foam product and a huge assortment of stamen are available.    I love both and the stamen add such a "pop" to your flowers.  

There are many methods of using the foam paper -  I used a twisting method for mine!





Sun Kissed Fleur Cling Stamp Set
Sun Kissed Fleur Die
Classic Leaf Cling Stamp Set
Classic Leaf Die
Fleur Border Basics Die
Butterfly Medley Cling Stamp Set
Butterfly Medley Die
Deluxe Flower Shaping Kit
Blushing Rose Paper Collection
Bright Pearl Medium Stamens
Art Foam Paper
Violet Metallic 3D Stamp Paint
Olive Grove Memento Dye Ink Pad
Tuxedo Black memento Dye Ink Pad
Stazon Ink Pad - Jet Black
ColorBox Liquid Chalk Ink - Wisteria

ColorBox Liquid Chalk Ink - Peony
Rajni Chawa's Crystal Clear
Designer Dries Clear Adhesive
Scor Pal Measuring & Scor Board
Sizzix Vagabond 2 with Solo Wafer Thin Die Adapter
Stack & Store Daubers
White Cardstock

Purple cardstock, Arches watercolor paper 140lb. watercolor brushes, Windsor Newton watercolor ink (Permanent Sap Green, Windsor Lemon and Ultramarine Blue), glue gun, Copic Markers (Butterfly - Y00, Y02, YR23 and Leaves - YG61, YG63, GY 67), sequins (light green and gold), Icicle Stickles, iron, Ranger Clear Crackle Paste.

Create a 51/2 x 5 1/2 top fold card from heavy white cardstock. Cut the base layer from purple cardstock, measuring 5 1/4 x 5 1/4 inches. Cut a 5 1/2 x 3 inch piece of designer paper using Blushing Rose Paper Collection. Die cut the right side using Fleur Border Basics Die. Cut watercolor paper at 5 x 5 inches and watercolor loose leaves in the background using Permanent Sap Green, Windsor Lemon and Ultramarine Blue watered down to a thin watery mixture. Allow to dry. Dye cut the right side using Fleur Border Basics Die. Adhere the layers as shown.

Stamp flowers from the Sun Kissed Fleur Cling Stamp onto Art Foam Paper using Stazon Ink - Jet Black. Die cut with the coordinating die. Sponge edges with Colorbox Liquid Chalk Wisteria and peony. Apply the petals to a hot iron for a few seconds, fold the petals and twist tightly. Allow to cool. Open and shape slightly with the Deluxe Flower Shaping Kit. Adhere the layers and punch a small hole in center of each flower. Thread the Bright Pearl Medium stamens through the center. Apply Violet Metallic 3D Stamp Paint to a few of the petals. Allow to fully dry. Apply Crackle paste to a few of the other petals and sprinkle with Crystal Clear. Set aside to dry.

Stamp the Classic Leaf Stamp onto Art Foam Paper using Olive Grove Memento Ink. Color the leaves with Copic Markers with YG61, YG63 and YG67. Heat the leaves with a hot iron and shape with the Deluxe Flower Shaping Kit. Stamp the Butterfly with Tuxedo Black Ink on X-Press it. Color with Copic Markers - Y00, Y02 and YR23. Gently shape with the Deluxe Shaping Kit. Apply Ranger Clear Crackle Paint to the outer edges of the wings and sprinkle with Rajni’s Crystal Clear.

 Adhere the leaves, flowers and butterfly using a glue gun. Embellish the edges of the Fleur Elegant Border and butterfly with Icicle Stickles. Apply sequins over the lightly colored watercolor leaves using Designer Dries Clear Adhesive.


Thank you for stopping by!   Happy Crafting!

Heartfelt Creations - You're A Classic

Hello friends!

It's inspiration Wednesday and we are featuring the Young at Heart Collection from Heartfelt Creations!  I live in the country and love seeing rusty old trucks in my area.   It reminds me of the country roots and of all the hard working people that make up the area.    I also wanted to do a slider card but needed to secure the truck in the front and back to avoid having the truck spin!  LOL    I hope you like my creation.

Young at Heart Paper Collection, HCDP1-283
Simply Classic Cling Stamp Set, HCPC-3801
Simply Classic Die Set, HCD1-7159
Fleur Border Basics Die, HCD1-7120
Flowering Dogwood Stamp Set, HCPC-3773
Flowering Dogwood Die Set, HCD1-7129
Window Box Fillers (Winters Eve Collection), HCPC-3795
Window Box Fillers Die Set, HCD1-7149
Deluxe Flower Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive, 352854
3D crystal Lacquer, 245125
Desert Sand Memento Ink, TSMP804
Tuxedo Black Memento Ink, TSMP900
Color Box Chalk Ink - Berrylicious, 71053
Color Box Chalk Ink - Lime Pastel, 71026
Scor-Pal Measuring & Scoring Board, 173742
Stack & Store Daubers, HCDA1-449
White Cardstock, HCPP2-451
Sizzix Vagabond 2 with Solo-waferThin Die Adapter, 532423 Kit









Navy cardstock,  dark brown cardstock, Distress Tool, Heather Flower Soft, mini-dots, X-Press It, Trimmer, mini mister, Black colored pencil, sewing machine, four nickels, Detail Black embossing powder, Versamark, Heat Tool, Copic Alcohol Ink Markers - (Truck- B00, B21, B23, B29,YR20, YR23, YR26, E15, Sepia 0.03 multiliner, Greens/flowers -YG11, YG61, YG63, YG65, Tires/Crome - C0, C1, C3, C5, C7, Windows - B00, C0.

Create a 5 1/2 x 5 1/2 inch card base.  Cut a  navy base layer at 5 1/4 x 5 1/4.  Cut two designer layers from the Simply Classic paper collection. Sew white stitching around the edges of the designer paper that will be on top.  my tension is off on the sewing and I left it that ay to add to the rustic , distress look.  Distress the edges.

The rusted, well loved truck was cut from the Simply Classic Cling Stamp Set using Tuxedo Black  Memento Dye Ink.  I used X-Press It but you can use any white Copic compatible paper of your choice.  I used the following color combo (Truck- B00, B21, B23, B29,YR20, YR23, YR26, E15, Sepia 0.03 multiliner, Greens/flowers - YG11, YG61, YG63, YG65, Tires/Crome - C0, C1, C3, C5, C7, Windows - B00, C0).  Die cut the truck with the coordinating die.  Cut 2 additional images from dark cardstock.  Adhere with Designer Dries Clear Adhesive for strength.  Adhere 3D Crystal Lacquer to the windows and allow to dry.   Apply flower soft to the bed of the truck.

The slider path can be cut with a slider die, free hand, or with Fleur Border Basic die.  I used the Fleur Border Basics.   I positioned  the die at a diagonal angle and only sandwiched the portion of the die I wanted to cut.   The area that I did not want to cut extended off the edge of the cutting plates.  I positioned it again to allow a 1/2 inch path and repeated the process.   I drew some rocks around the path with a black Sharpie and shaded them with a black colored pencil.  I extended the road on the adjacent page as shown.

Adhere the blue layer and plain designer paper on the front of the card base.  Apply double dimensional foam circles to the layer with the slider path to the top of the designer paper on the left.  Make sure to not put the dots too close to the slider path - you will want plenty of room for the sider to move.  Adhere two stacked mini dots in between two nickels.  Adhere to the back portion of the truck.  Add another two stacked mini dots in between two nickels and attach to the front part of the truck.  Applying the sliding coins to the front and back of the truck will allow it to slide but not spin in a 360 degrees.   This will just allow it to move along the path you created.    Adhere flower soft along the edges of the road.

Stamp, color and die cut  five dogwood flowers from the Flowering Dogwood Set.  Sponge the center with Lime Pastel Chalk Ink and sponge the tips with Berrylicious Ink.   Stamp and die cut the green leaves from the Simply Classic Set. Color with Copic YG61, YG63 and YG65.  Shape the flowers and  and leaves with the Deluxe Flower Shaping Kit.  Adhere the stamen with Dries Clear Adhesive.  Stamp and die cut the branches from  the Winter's Eve Collection (Window Box Fillers).   I trimmed the branches and used them for the dogwood tree branches.  Adhere the leaves, branches and flowers  at the bottom of the card.

The word "JOURNEY" was stamped  with Versamark  and Detail Black embossing powder.  Heat set.  The sentiment was die cut with the Simply classic Die.  Adhere sentiment to the upper right corner of the card.    And for the final touch, adhere a small wooden heart to the corner.

Thank you for stopping by and I hope you check out all the new release products at Heartfelt Creations!

Life is a Journey

Heartfelt Creations Products

Young At Heart Paper Collection, HCDP1-283

Young At Heart Cling Stamp Set, HCPC-3800

Young At heart Die Set, HCD1-7158

Simply Classic Cling Stamp Set, HCPC-3801

Simply Classic Die Set, HCD1-7159

Memento Tuxedo Black Dye Ink, TSMP900

White Cardstock, HCPP2-451

Designer Dries Clear Adhesive, 159723

Vagabond-2 with Wafer Thin Die Adapter, 532423 Kit

Scor-Pal & Measuring and Scoring Board, 173842

Stack & Store Daubers, HCDA1-449

NuVo Crystal Drops - Ebony, nu650

Designer Dries Clear Adhesive, 159723

Other Products

Corner rounder, X-Press It Blending Cardstock, paper trimmer, mounting tape, black cardstock, Vintage Photo Distress Ink, Versamark Ink, Detail Black Embossing Powder, heat tool, mini dots, Silver Ice Stickles, Copic Alcohol Ink Markers (Bike - C3, C5, R24, Flowers -  YG67, G99,  RV10, RV23, Vase - B21, B23, B4, B26, B29) 

Instructions

Create a top fold card by cutting heavy white cardstock measuring  4in. x 11 inches. Score and fold at 5 1/2 inches.   Cut the designer paper from the Young At Heart Paper Collection  at 3 3/4 in. x 5 1/4 inches.   Use a corner rounder on the corners and sponge with Vintage Photo Distress Ink. Adhere to the card base with double sided tape for extra strength.   

Stamp the Young At Heart bike image 2 times with Memento Tuxedo Black Ink on X-Press It Blending Cardstock.   Color  the  focal image with Copic Alcohol Ink Markers with the following color combo -  (Bike - C3, C5, R24, Flowers - YG67, G99,  RV10, RV23, Vase - B21, B23, B4, B26, B29).  Color the big wheel only on the second image.

Die cut the images with the coordinating die and cut 3-4 additional images from black cardstock.  Cut the large wheel away from the black cardstock images and from the  second white image (the one with only the  large wheel colored).    Layer a black large wheel on top of the wheel on the focal image. (That is the image you colored completely).  A mini dot at the center of the wheel can be placed between each black layer.  You can add 3 or 4 layers to the large wheel according to your preference.  You will have one white bike image that has only the wheel colored.  Cut the large wheel away from the image and adhere it to the top of the black cardstock.   This will give the large wheel a lot of dimension and draw the eye to the bike.  Apply Silver Ice Stickles sparingly as shown in the picture. Set aside to dry.   

Stamp the "Journey" image with Versamark Ink and apply Detail Black Embossing Powder.   Heat set and allow to cool.   Die cut with the coordinating die set.  I did not add the extra layers of cardstock to the sign because I wanted the bicycle to "POP".    the bicycle and sign can now be adhered to the card.   For a final touch, add a drop of Nuvo Ebony Crystal Drops to the center of each wheel.    

Heartfelt Creations - Relaxing Bear Mixed Media Tag And Winner Announcement

Welcome!

It's time to announce the winner of my Beary Fun Retreat Collection Give-A Way!   

The winner is  _   

JanijapSeptember 24, 2017 at 6:06 AM

Thank you for your time in putting together this awesome step by step tutorial. I've always been intimidated with the process of coloring stamped images and I refrained from getting the bear collection because I have no idea how to even start to color them. Your tutorial made me think I can do this!

Big congratulations to you!   It feels great to celebrate our Heartfelt Creations crafting community!    I am so grateful for being voted in to be a part of the design team that I just wanted to "pass it on".    Enjoy!   Marie 

And now - for this weeks Heartfelt Creations Inspiration Wednesday, I would like to share a mixed media tag I created!   

Beary Fun Retreat Paper Collection, HCDP1-282

Beary Fun Retreat Cling Stamp Set, HCPC-3797

Beary Fun Retreat Die, HCD1-7151

Sunflower Accents Cling Stamp, HCPC-3799

Sunflower Accents Die, HCD1-7153

Designer Dries Clear Adhesive, 159723

Metal Adhesive Tip, 352854

Glue Pin, Pin6

Memento Espresso Truffle Dye Ink, TSMP808

Memento Bamboo Leaves, TSMP707

Deluxe Flower Shaping Kit, HCST1-401

Stack & Store Daubers, HCDA1-449

Vagabond 2 with Solo-wafer Thin Die Adapter, 532423-kit

White Cardstock, HCPP2-451

Bright Ideas Prills (Go Green), ANC852

Light Blue Metallic 3D Stamp Paint, 315944

Moss Green Metallic 3D Stamp Paint, 315942

Carmine Red Metallic 3D Stamp Paint, 315951

Violet Metallic 3D Stamp Paint, 315947

Gold Metallic 3D Stamp Paint, 315937

Heavy white cardstock, green cardstock,  black gesso, mounting tape, texture paste, mini brick stencil,  honeycomb chipboard, eyelet, eyelet setter,  twine, Vintage Photo Distress Ink, heat tool,  Copic Alcohol Ink Markers (bear - E30, E31, E33, E34, E37, R20, wood/stick/marshmallow - E40, E41, E43, E47, Fire and sunflower - E02, E11, YR21, YR23, YR26,  stones - W0, W1, W3, W5, Y11), Crystal Stickles, quilling tool, circle paper punch, black acrylic paint, Black Soot Distress Ink. 

Cut tag from heavy white cardstock to measure 7 x 3 3/4 inches.  Trim top as shown.  Apply black gesso to front and back of tag and heat set.  Apply texture paste over mini brick stencil and allow to dry.   Apply gesso over honeycomb chipboard.  Place the  honeycomb chipboard on the bottom corners.  Apply black acrylic paint over the front of the tag. Heat set.  Apply Light Blue Metallic 3D paint to the top of the card.   Apply Moss green Metallic 3D Paint to the bottom.   Apply Violet, Gold and a small amount of Carmine Red Metallic 3D Stamp Paint to the tag a shown.  This will create a fun and whimsical flowered meadow.  Allow to dry.   

Stamp the bear, sunflower, fire and green leaves with Espresso Truffle Ink.  Color the bear image and fire with the following Copic markers (bear - E30, E31, E33, E34, E37, R20, wood/stick/marshmallow - E40, E41, E43, E47, Fire and sunflower - E02, E11, YR21, YR23, YR26,  stones - W0, W1, W3, W5, Y11).   Die cut the images. Sponge the leaves with Bamboo Leaves ink.  Gently shape the leaves with the Deluxe Flower Shaping Kit.  Apply green prills to the center of the sunflower.   Cut 3-4 additional cuts of the bear and adhere them together with Dries Clear Adhesive  This will pop the image up and give the image  strength.  

Quill a loose green coil and pinch to make a shaped marquise.  Adhere the elements to the tag as shown.   Mat the sentiment from the Beary Fun paper collection with green cardstock and adhere at the bottom of the tag.   

Sponge the edges of the  tag with Black Soot Distress Ink.  Punch hole at the top and insert and  eyelet.   Apply the twine to compete the tag. 

Thank you for stopping by!