Heartfelt Creations - Happy Anniversary

 This wonderful stamp and die set are from Heartfelt Creations new Classic Wedding Collection.    I Love the Classic Wedding Rose stamp!    I recently used this stamp for a wedding card and a birthday card.   It's easy to use and adds a touch of elegance to any card!  

Classic Wedding Paper Collection, HCDP1-279

Classic Wedding Roses, HCPC-3788

Classic Wedding Roses Die Set, HCD1-7142

Classic Wedding Wishes, HCPC-3790

Classic Rose Stamp, HCPC-3752

Classic Rose Die Set, HCD1-7110

Memento Desert Sand Dye Ink, TSMP804

Memento Olive Grove Dye Ink Pad, TSMP708

Fluid Chalk Ink pad - Berrylicious, 71053

Gold Gala Glitz, 4gld

Rajni Chawla's Crystal Clear, PGM15015

Rajni Chawla's Frosting Powder, PGM15016

Scor-Pal Measuring and Scoring board, 173842

Deluxe Flower and Shaping Kit, HCST1-401

Designer Dries Clear Adhesive, 159723

Vagabond-2, 532423

Cardstock - White, HCPP2-451

Embossing Powder - White, RPE1685

Stack and Store Daubers, HCDA1-449

Tangelo cardstock, green cardstock,  hot glue gun, double sided tape, foam mounting tape, mini mister, Misti Stamping Tool, Copic Alcohol Ink Markers (Flowers - YR0000, YR000, RY21, Leaves- YG99, YG95, HG91, YG67, YG65, YG61, C0, C1), white gel pen, White Prismacolor pencil PC938, X-Press It Blending Cardstock, Coral Distress Ink, Ranger Crackle paste. 

Create a 5 1/2 x 5 1/2 inch card base with heavy white cardstock.  Cut base layer at 5 1/4 x 5 1/4 inches from Tangelo cardstock.  Select the apricot colored paper from the Classic Wedding Paper Collection and cut at 5 x 5 inches.  The paper was covered with a light coat of Designer Dries Clear Adhesive.  I used my finger to rub it on the paper.  I sprinkled Frosting Powder and heat set.  Apply some Dries Clear glue to the grey/white leaves and lightly sprinkle with Crystal Clear Glitter.    The edges were sponged with Coral Distress Ink  and distressed.  Adhere the layers with double sided tape.  

 Stamp the Classic Wedding Roses onto X-Press It using Desert Sand in order to give the flowers a "no line" appearance.   Color the image with Copic Alcohol Ink Markers with the following combo - (Flowers - YR0000, YR000, RY21, Leaves- YG99, YG95, HG91, YG67, YG65, YG61, C0, C1).  Apply white colored pencil on the edges of the flower image to lighten the highlights.  Die cut with the Classic Wedding Roses Die.   Cut 3-4 additional images from Tangelo cardstock. Emboss the sentiment from Classic Wedding Wishes on the center of one shadow layer using white embossing powder and heat set.  Layer the shadow layers with foam mounting tape in-between each and place the colored image on top.   

Stamp Classic Rose Stamp petals using white embossing powder and heat set.   Lightly sponge the  petals with Coral Distress Ink.  Shape the flowers using the Deluxe Flower Shaping Kit.  Apply a light coat of Ranger Crackle Paste and sprinkle Frosting Powder and heat set.  

Stamp the leaves from the Classic Rose Stamp set on green cardstock with Memento Olive Green Ink.  Sponge with Olive Green ink on the edges  and apply  a small amount of Berrylicious Chalk Ink on a few leaves.  Die cut with the corresponding die.   Shape with the Deluxe Flower Shaping Kit and allow to dry.   

Adhere some Gold Gala Glitz to the area that will be near the dimensional flowers using Dries Clear Adhesive - (See reference photo).   Adhere the leaves, flowers and Classic Wedding Rose heart using a glue gun.   Emma Lou has a wonderful video for creating Classic Roses HERE. 

Thank you so much for stopping by.    If you are inspired to try this - I would love to see your special creations!   

Heartfelt Creations - Cupcake Centerpiece for Wedding Guest Table

I love this time of year and always wait to see what the wonderful wedding releases look like.    
I wasn't disappointed when Heartfelt Creations released this wonderful Classic Wedding Collection!
I love how the stamps and die on this set can be used for so many different occasions.    I think this will be perfect for a few anniversaries I have on my calendar!

I love having a centerpiece on each guest table.    I love having something for each to take home.   Many people want to simplify the process of sending cake home with the guests.   I decided to create little pie slice boxes that have an insert that hold's a cupcake.   The cupcakes can be made from the same batter as the wedding cake and what a great thing to be able to let the guests slip a pie box out at the end of the evening.   I love to take a little sweet treat home after a wedding celebration!   This is the perfect treat!    

Classic Wedding Paper Collection, HCDP1-279
Classic Wedding Bells Stamp, HCPC-3789
Classic Wedding Bells Die, HCD1-7143
Classic Rose Stamp, HCPC-3752
Classic Rose Die Set, HCD1-7110
Memento Dye Ink - Sweet Plum, TSMP506
Rajni Chawla's Crystal Clear, PGM15015
Rajni Chawla's Frosting Powder, PGM15016
Scor-Pal Measuring and Scoring Board, 173842
Deluxe Flower and Shaping Kit, HCST1-401
Designer Dries Clear Adhesive, 159723
Vagabond-2, 532423

Stack and Store Daubers, HCDA1-449

Mr. & Mrs. SVG file from svgcuts.com, Pie Slice/Cupcake Box sag file from the Silhouette Studio, silver cardstock, paper trimmer, rhinestones, pearls, Copic Alcohol Ink Markers ( (bells- C0, C1, C3, C4), favor ties, styrofoam, glue gun, tulle ribbon, wire, heat tool, silver embossing powder, satin silver edged ribbon, crackle paint, Versamark.

Assemble the cake pedestal as directed from the SVG file Mr. & Mrs (svgcuts.com).      The pie slice/cupcake boxes were cut  from the Silhouette Studio but I know Cricut has a great pie slice box as well.   Cut eight cake boxes for the first layer. You can cover styrofoam with the wedding designer paper  for the second layer.  You can add additional layers of the pie slice /cupcake boxes  if you have more than eight people at the guest table.     

The roses were created with the Classic Rose Collection.   They were stamped on white cardstock with Versamark Ink and silver embossing powder.  Heat Set.   The flowers were sponged with Sweet Plum Memento Ink and shaped with the Deluxe Flower Shaping Tool.  The flowers were assembled and allowed to dry.   A light coat of Crackle Paint was applied and dusted with frosting powder.  The flowers ere heat set.   Emma Lou has a wonderful tutorial on creating roses here - https://www.heartfeltcreations.us/video/129/how-to-create-dimensional-roses

The Classic Wedding Bell set was stamped on X-Press It Blending Cardstock with Versamark Ink and silver embossing powder.   They were colored with Copic Alcohol Markers - C0, C1, C3, C4.  They were die cut with the coordinating die.   I die cut 4 additional  bells from grey paper and layered with dimensional mounting tape in-between each layer.  Designer Dries Clear Adhesive was applied lightly to the bells and were sprinkled with Crystal Clear glitter.    

The cake was assembled and embellished with the flowers, rhinestones, pearls, tulle, favor ties and satin silver edged ribbon.   

The cake is placed on the wedding guest table.  The pie slice/cupcake boxes contain cupcakes that were made from the wedding cake batter.   Each guest at the table can take one cake slice home at the end of the evening.   If you have more than eight guests per table, you can increase the number of  layers for your centerpiece.   You can create one cake creation for each guest table.  I will be creating this project for some friends that will be getting married next month and will be using the color theme they are using for their wedding.     

Thank you so much for stopping by and I would love to see your take on this project!  

Heartfelt Creations - Classic Wedding Bells

Hello everyone!    I love weddings so my heart skipped a beat when I saw Heartfelt Creations fantastic new release - Classic Wedding Collection!  It doesn't get any better than this!  

Heartfelt Creations Products

Classic Wedding Paper Collection, HCDP1-279

Classic Wedding Bells Cling Stamp Set, HCPC-3789

Classic Wedding Bells Die Set, HCD1-7143

Decorative Medallion Die, HCD1-7144

Classic Wedding Wishes, HCPC-3790

Designer Dries Clear Adhesive, 159723

Metal Tip for Adhesive, 352854

Memento LuLu Lavender Dye Ink, TSMP504

Rajni Chawla's Frosting Powder, PGM15016

Silver Gala Glitz, 10slvr

Scor-Pal Measuring and Scoring Board, 173842

Vagabond-2, 532423

White Cardstock, HCPP2-451

Grey cardstock, X-Press It Blending Cardstock, Copic Alcohol Ink Markers (C0, C1, C3, C5, W3, W1, W0, BV0000, BV00, BV01, BV04, BV08, BV13),  Crackle Paste, Heidi Swapp Dots and Hearts stencil, palate knife, pearls, Detail Black Embossing Powder, heat tool, double sided tape, double sided mounting tape.

Create a top folding card base at 11 inches  x 5 1/2 inches.  Score and fold at 5 1/2 inches.  Cut base layer from grey cardstock at 5 1/4 inches x 5 14 inches.   Select the silver-grey designer paper from the Classic Wedding Collection and cut at 5 x 5 inches.  

Stamp sentiment  on base of the designer paper with Versamark  and apply Detail Black Embossing Powder.  Heat Set.  Apply dots and hearts from the Heidi Swapp stencil and crackle paste on the designer paper.  Sprinkle with Frosting Powder and heat set.  Die cut one Medallion from the Decorative Medallion Die from grey paper.  Adhere the layers of the card and Medallion die cut on the card.   

Stamp the Wedding Bells image on X-Press It Blending Cardstock using LuLu Lavender Ink.  Color the image with Comic Alcohol Ink Markers (Bells - C0, C1, C3, C5, BV00, W3, W1, W0, Ribbon - BV0000, BV00, BV01, BV04, BV08, BV13, Leaves - C0, C1, C3, BV00).  Die cut image.  Cut 3-4 additional bell images on grey cardstock.  Adhere the bell layers with double sided mounting tape in-between layers.   Adhere the bell image.  Apply Designer Dries Clear Adhesive around the bell image base and coat with  Silver Gala glitz.  Apply pearls for embellishment. 

A Peek at the dimensional bell. 

Thank you so much for stopping by.   I hope you stop by Heartfelt Creations and their Blog to see all the new wonderful stamps and die that are a part of the Classic Wedding Collection!    

5/21 6/7 Heartfelt Creations - Birthday Wishes

Hello everyone.   I am back from vacation and totally enjoyed two weeks in the gorgeous Cook Islands.   It's wonderful to see new places and meet new people but it is good to get home after two weeks! LOL

Today I am sharing a fun shaker card from the Classic Petunia Collection that is available at heartfelt Creations now!  

Classic Petunia Bouquet Cling Stamp Set, HCPC-3787

Classic Petunia Bouquet Die Set, HCD1-7141
Small Classic Petunia Stamp Set, HCPC-3785

Fleur Border Basic Die, HCD1-7120

Memento Elderberry Dye Ink, TSMP507

Memento Bamboo Leaves Dye Ink, TSMP707

Rajni Chawla's Frosting Powder, PGM15016

Scor-Pal Measuring and Scoring board, 173842

Designer Dries Clear Adhesive, 159723
Dimensional Foam Dots, DDots
Stack and Store Daubers - HCDA2-450

Vagabond-2, 532423

Cardstock - White, HCPP2-451

Embossing Powder - White, RPE1685

Violet cardstock, X-Press It Blending Cardstock, Sequins, Fuse Tool, Fuse Sleeve, Texture paste, Mini Moving Vines Stencil, Palate Knife,  Spellbinder Label  Eighteen Die,  White gel Pen, double sided tape,  trimmer, Stickles, Ranger Crackle Paste, Black Detail Embossing Powder, Versamark Ink,  Copic Alcohol Ink Markers - (Flowers :V00, V01, V12, V15, V17, V20,  RV23, RV25, RV68   and Leaves G99, YG67, YG65, YG61, W4). 

Create a 5 1/2 x 5 1/2 inch top fold card. Cut a 5 1/4 x 5 1/4 inch violet base layer. Select the designer paper from the Classic Petunia Designer Paper Collection and cut at 5 x 5 inches.   Adhere layers.

Create a pocket layer using the same designer paper and die cut with Fleur Border Basic Die.   Create a Border with the die from violet cardstock.  Create texture on the designer paper with the Mini Moving Vines Stencil and texture paste.  Adhere to the card using double sided tape.   Cut a shaker  tag using the designer paper.  Sponge edges with Memento Bamboo Leaves.   Apply Crackle to corners and apply Frosting Powder and heat set.  Cut pocket tag using  Fuse Tool, Fuse Sleeve and sequins.  Stamp the Petunia Bouquet image with Memento Elderberry Ink and color with the following  Comic Alcohol Ink Markers (Flowers V00, V01, V12, V15, V17, V20, RV23, RV25, RV68 and leaves G99, YG67, YG65, YG61, W4).  Die cut the bouquet and adhere to the shaker tag.  Insert the sequins and fuse the sleeve closed.  

Stamp the small bouquet  and corner image  on X-Press It with Memento Elderberry Ink and the leaves with Memento Bamboo Leaves Ink.  Color with the following Comic Alcohol Ink Markers - (Flowers V00, V01, V12, V15, V17, V20, RV23, RV25, RV68 and leaves G99, YG67, YG65, YG61, W4).  Die cut with the coordinating die.  Stamp the flower pot with Versamark Ink and emboss with Detail Black Powder. Heat set and die cut.   Gently shape to form curve with fingers.  Stamp the birthday sentiment from the Small Classic Petunia Set with Versamark and emboss with white embossing powder on violet cardstock.  Die cut with Label Eighteen.   Adhere images with dimensional foam dots.

Thank you for stopping by and come back soon!